05 Shifter Overdrive Button Removal

[AboStangster]

Hey, has anyone successfully removed the overdrive button from an 05 to 09 Mustang GT shifter without breaking it? Need to know how. Thanks.

 

[Joe combs]

yes... remove the console top...there are 4 snap lock areas on the shifter top, you can push on them to release the top. once you have the top loose, locate the white wire on the passenger side of the shifter. there is a small tab holding the connectors together. once you have that loose there is a small torx on the front of the shifter handle, remove the torx, the gently tap the shifter handle upward to remove it.

 

[AboStangster]

Thanks Joe. I was able to get that far, but do you have any idea on how to remove the overdrive button from the shifter handle?

 

[Joe combs]

I have a junk T handle at the garage that i can look at tomorrow when i get there....

 

[07 Boss]

Hey, has anyone successfully removed the overdrive button from an 05 to 09 Mustang GT shifter without breaking it? Need to know how. Thanks.

Can I just ask why you want to remove the button from the handle? Curious.

 

[AboStangster]

I'm experimenting with a ball shifter and want the overdrive button as it test.

 

[07 Boss]

I'm experimenting with a ball shifter and want the overdrive button as it test.

Like this?

 

[AboStangster]

Not quite.
I'm working with a variation of the White Madness ball shifter. If it works, it will look more like a standard shifter, but work as the normal shifter but without overdrive. I still want to use my overdrive button though, so will have to do something separately.

 

[AboStangster]

Hey all.
I just wanted to close the loop on this one.
I completed my project.
I just need to drill the hole and finish installing the overdrive button.

 

[JusRonnyBoy]

How did you rewire the O/D button?

 

[AboStangster]

Hey,
Thanks for asking.
I connected it to a separate
12mm DC Power Button 5V LED, Waterproof Latching Push Button Switch On/Off 23V (Red 2V).
I dropped it into the console to the right of the shifter.
I set it for the LED to be on when overdrive is off.
I hope this helps.

1. 
   
   
   
   
   
   
   
   
   
   
   

 

[Sammy70]

Nicely done, it looks great!