2007 4.6L 3V Engine w/Goodies

[BlackDeath]

Recently became unemployed and decided to sell the motor out of my car. Need money to pay bills. Engine is still in the car and will take out upon payment. I will need one day to take it out. Car is in storage and not being driven. Motor is in great shape and runs very good! Price is $3500 SHIPPED. Only thing that will be missing is the injectors. You will need 39lb as the injectors I have were borrowed. Will Come with Stock ThrottleBody Also it will work in an 05-06 with a different coolant crossover. No Warranty Please Email me for all inquiries. [email protected] as this goes straight to my phone and quicker response time.

Now for Details! This isn't your average 4.6L 3V,

Blow By Racing Stage 3 heads, w/ Manley Valves, Manley Springs, CNC Ported, Heads have less than 10,000 miles
Blow By Racing Stage 2 Cams
Blow By Racing Cam Phaser Lock Outs
ARP Head Studs
FelPro .036 Head Gaskets
Ford Racing Intake Manifold
Stock Fuel Rails
BBK 1"5/8 Long Tube Headers with 2" 3/4 BBK X-Pipe
Steeda Underdrive Pulleys
All Accessories Excluding A/C Compressor
Factory engine Harness if needed. Some areas have been cut due to guages
Ford Racing GT500 Fuel Pumps w/ an Extra Sending Unit
Spec Billet Steel Flywheel (unknown condition but working great)
Ram PowerGrip HD Clutch (unknown condition but working great)
The short block is completely stock with 60,000 miles

I feel this is a good price considering the actual money I have into this. Thanks for your time and don't be scared to ask questions if interested! I do have a few pics of when I put the heads on the short block and the heads themselves. Also a vid complete just taken today. Some one is getting a steal so act quick! Will Drop price for local pick up or meet half way as far as Dallas. Coming from Corpus Christi, Tx. I will Make a crate if shipping. Please let me know if I need anything else for my post. Its alittle hard to get a shot of everything together still in the car. Thank You!!!

Vid was taken my phone so kind of bad quality

2007 Mustang 3v Engine For Sale $3500 Shipped - YouTube

This is from when I first put the heads on

 

[GTGHOST]

looks like a steal if you ask me.

For anyone wondering about the heads...they are 2700 new...

Blow-By Racing's
2005-06 Mustang GT 3V Head Flow #'s
Intake
Lift----Stock CFM------CNC Porting CFM
.100-----77.1--------------75.3
.200----147.0-------------162.0
.300----199.6-------------228.3
.400----216.0-------------273.8
.500----223.2-------------283.6
.600----224.8-------------292.9
Exhaust
Lift----Stock CFM-----CNC Porting CFM
.100-----52.7-------------46.2
.200-----97.8------------104.3
.300----120.2------------135.7
.400----138.1------------163.2
.500----148.2------------177.0
.600----153.7------------189.6​

 

[Bullet223]

Want to part the heads out? I'd be interested in the set

 

[crownaviation]

Helluva deal there..

 

[555]

New or older style spark plug heads?

 

[sinabite]

Damn bro, suck your out of a job and have to pay the bills with this.........that's one helluva a deal though. surprised it has stayed up this long.

 

[Saleen S281]

Damn, if i had the coin I'd be all over it, sucks about your job. Someone could buy this, strip the heads, cam, frpp intake, sell the block aha come out on top.

 

[BlackDeath]

looks like a steal if you ask me.

For anyone wondering about the heads...they are 2700 new...

Blow-By Racing's
2005-06 Mustang GT 3V Head Flow #'s
Intake
Lift----Stock CFM------CNC Porting CFM
.100-----77.1--------------75.3
.200----147.0-------------162.0
.300----199.6-------------228.3
.400----216.0-------------273.8
.500----223.2-------------283.6
.600----224.8-------------292.9
Exhaust
Lift----Stock CFM-----CNC Porting CFM
.100-----52.7-------------46.2
.200-----97.8------------104.3
.300----120.2------------135.7
.400----138.1------------163.2
.500----148.2------------177.0
.600----153.7------------189.6​

Thanks for posting the flow #'s I really appreciate it

Want to part the heads out? I'd be interested in the set

I'd really like to see what happens in about a week or so if the motor doesn't sell I would prolly part out

Helluva deal there..

Thanks, it really is!!

New or older style spark plug heads?

They are the older style. BBR was out of the newer ones when I bought these

Damn bro, suck your out of a job and have to pay the bills with this.........that's one helluva a deal though. surprised it has stayed up this long.

Thanks man, yeah it really sux but I have had big plans for this car and was going to go another route so selling the motor was going to happen. Anyone who knows the parts and how much they are knows I have way more invested then just what I'm asking. Lets just put it this way. I had the heads built then over nighted with no core. The bill on the heads alone was 3400!!! lol. Kinda puts a knot in my stomach for selling it this cheap but we have to do what we have to somethimes.

Damn, if i had the coin I'd be all over it, sucks about your job. Someone could buy this, strip the heads, cam, frpp intake, sell the block aha come out on top.

Exactly my way of thinking so I hope someone scoops this up and has a blast with it.

Whoever buys it must pm me if they run it at the track cause the car was only on a base tune so never even got to rip on it to much or take it to the track.

Thanks again for all the kind words and hope to be pulling this thing out for someone really soon! This was kind of a last resort but here it is!

 

[shiznight]

What kind of numbers did it put out?

 

[crownaviation]

I would part it out too. Will take longer but make more in the process. You could probably get some quick cash flow right away also... Just my thoughts, you are giving that thing away. I don't have anything I need right now but possibly fuel pumps for the kit I am putting together for someone else. A good deal is one thing but kickin a guy when down is another.. Too cheap my man.

Hell, you could throw the block off the Harbor bridge and still get close to your asking price lol.

 

[GTGHOST]

In all honesty you could probably just put the heads and cams up for sale and require the buyer to ship you there heads and stock cams. Could easily get 2000 for the pair of heads and another 600 for the cam and spring package. People let me know if I am wrong but I think that's his best bet, even that way he would have a car to drive too...I am looking out for you man, I even considered it myself if I
Didnt have my heads already being done

I would part it out like this -

Heads 2k - seller must ship stock to him
Cams and springs - 600-700
Intake - 500
Sell the long tubes and put stock mani's on
Basically sell whatever you have stock parts to replace that way you can still drive the car

 

[nasty281]

What kind of numbers did it put out?

same here +1

 

[Makdaddy]

Hmmm

This could be my project motor for next winter

Just need to find room in the garage

 

[hamish]

This thing should already be sold!

 

[555]

PM sent

 

[1andonlywhitie]

If only I had the money.. GLWS man.

 

[DILYSI Dave]

Got any dyno numbers / sheets?
Compression numbers?

 

[BlackDeath]

All pm's and emails replied! Thanks everyone for the kind words and advice! I know I prolly should be parting it out and if it dose not move by sometime next week I might consider. As far as the hp and tq numbers, we did one pull about a year ago on a dyno day at a local shop. On a very conservative base tune that my buddy did I remember the hp being right at 352. Don't remember the tq #'s or know where on earth that sheet is. I hurt the rear end a long time ago and didn't want to go further from there. I just mainly putted it around town and got on it a few times. It felt really good and never stopped pulling. I know people with a similar set ups and they were in the 380's to 390's. There is no doubt in my mind that this motor won't do that. It was put together in my garage and when I did the compression test on it I want to say all holes where pretty close to each other and in the 175 range? Like I said its been a year and a lot has happened since then lol. Thanks again everyone!

 

[charlie123]

LOL me and wilycyot just talked about me doing a 3v motor swap in my hopefully newly acquired mustang. If everything goes well I have meet me somewhere in tx and we can do this.

 

[BlackDeath]

LOL me and wilycyot just talked about me doing a 3v motor swap in my hopefully newly acquired mustang. If everything goes well I have meet me somewhere in tx and we can do this.

I do have a sale pending at the moment but get with me when you make your new purchase, and if the deal falls threw maybe we can do buisness. I'm pretty sure the buyer is going to take it. Good luck with your new project!!