4.10 to 4.30's

[conexion914]

I have just a stock 4.6 auto.
Steeda CAI
O/r x pipe
Borla Touring axleback
4.10s, truetrac
09 intake manifold with delete plugs.
Bama tune.
PTC converter
All control arms. Relocation brackets
Cobra jet rear springs. Lakewood 50/50 shocks. Lower radiator support and no front swaybar.
Skinnies and drag radials and I run a short belt to by pass the power steering pump at the track.

Sent from my SGH-I747 using Tapatalk 2

 

[NotQuik]

Yep, you're correct. The 4.56's was before new moser rear end.

I think he is running 4.88's now that he got sponsored by currie. I plan on 4.56's when I get a chance.

 

[Mike K]

Oh yeah miser not currie. My bad.

 

[daveyboy]

I have just a stock 4.6 auto.
Steeda CAI
O/r x pipe
Borla Touring axleback
4.10s, truetrac
09 intake manifold with delete plugs.
Bama tune.
PTC converter
All control arms. Relocation brackets
Cobra jet rear springs. Lakewood 50/50 shocks. Lower radiator support and no front swaybar.
Skinnies and drag radials and I run a short belt to by pass the power steering pump at the track.

Sent from my SGH-I747 using Tapatalk 2

What is the belt number for the short belt you are using?

 

[conexion914]

Try
4060882
6pk2240

That's for a good year gatorback belt.

A member posted a pic of it in one of my threads. I got mine from Auto zone and its an ac delco belt.

Sent from my SGH-I747 using Tapatalk 2

 

[daveyboy]

i think i will pick that belt at work tomorrow

 

[lindertw]

Try
4060882
6pk2240

That's for a good year gatorback belt.

A member posted a pic of it in one of my threads. I got mine from Auto zone and its an ac delco belt.

Sent from my SGH-I747 using Tapatalk 2

I have the belt, is there a good diagram for how it's installed/routed?

 

[daveyboy]

I have the belt, is there a good diagram for how it's installed/routed?

might be helpful..
How much is the power steering by pass worth at the strip any one know?

 

[conexion914]

I estimate roughly a tenth on my car.

The belt will only go on way way. Look at the stock belt and note the path. The short belt just won't go around the power steering pump. I can take pics this weekend if you need.

Sent from my SGH-I747 using Tapatalk 2

 

[daveyboy]

Cool I woul like that....thanks for everones help btw....keep thoughts and ideas comin

Edit. I just found that belt at work collecting dust I'm taking that baby home

 

[GT.350-R]

Yep, 4:88 gear with a 28in tire, going thru the traps at 6800 @ 115

 

[daveyboy]

Yep, 4:88 gear with a 28in tire, going thru the traps at 6800 @ 115

Still running the three valve?

 

[GT.350-R]

Still running the three valve?

Yep, stock 3V from throttle body to pan.

 

[daveyboy]

Nice....what's your secret

 

[GT.350-R]

Drive like ya stole it.

 

[daveyboy]

Well I got that covered lol... Do you drive that car on the street? How are them gears @60 if so

 

[daveyboy]

I have just a stock 4.6 auto.
Steeda CAI
O/r x pipe
Borla Touring axleback
4.10s, truetrac
09 intake manifold with delete plugs.
Bama tune.
PTC converter
All control arms. Relocation brackets
Cobra jet rear springs. Lakewood 50/50 shocks. Lower radiator support and no front swaybar.
Skinnies and drag radials and I run a short belt to by pass the power steering pump at the track.

Sent from my SGH-I747 using Tapatalk 2

Tell me more about the 09 manifold with delete plugs

 

[GT.350-R]

Don't drive it a lot, just cause I don't have the time.
But it drives just like normal. The gears are set tight, so they make a little noise.
Other than that, it's a lot of fun.

 

[GT.350-R]

Tell me more about the 09 manifold with delete plugs

I have a brand new take off intake with delete plugs installed if ya want it. $190 plus shipping.
It's just like putting the plates on , but just easier and weighs less.

 

[daveyboy]

I have a brand new take off intake with delete plugs installed if ya want it. $190 plus shipping.
It's just like putting the plates on , but just easier and weighs less.

I done PM'd you