Anyone having Issues with JBA?

[trbobusa]

just wondering if anyone running JBA headers are having any issues with fitment or rattling, pinging etc...re checked it all and still sounds like marbles in the pipes under acceleration...maybe too lean?

 

[trbobusa]

long tubes

 

[95ragtop]

Mine fit fine. Sounds like you have something loose or part of your exhaust is hitting something.

 

[trbobusa]

Mine fit fine. Sounds like you have something loose or part of your exhaust is hitting something.

everything has been off twice, checked and nothing is touching, only on aceleration is when it does it, not just cruising

 

[bullittrevor]

can you be a little more specific on what the noise sounds like? I have jba lt's btw.

 

[trbobusa]

can you be a little more specific on what the noise sounds like? I have jba lt's btw.

sounds like a ping or marbles in the pipes under accel only just cruising make no noise at all, deff not metal to metal

 

[JesseW.]

mine hits the steering linkage under certain situations and sounds just like you described....

 

[Royski]

Are you running cats? I had a cat go bad and it sounded almost like an engine knock under the car.

 

[fordracer666]

Headers

Yeah Check your steering shaft .

 

[trbobusa]

Are you running cats? I had a cat go bad and it sounded almost like an engine knock under the car.

no cats, o/r hpipe

 

[trbobusa]

Yeah Check your steering shaft .

steering shaft is clear

 

[kevinatfms]

steering shaft may be clear when looking at it but if the engine rolls over without solid mounts it may be hitting the steering shaft or the frame rails.

i have jbas and they fit like crap. the motor mount on the passenger side hit pretty bad and the left side was touching the frame. i ended up cutting them up and making my own tubes...

 

[SD07GT]

Just
Busted
Again

How these ass holes are still in business is a miracle !

 

[kevinatfms]

once you get them in there they are great, but that is what is expected by going cheaper than the top. they made great power on my car.

 

[Boss281]

I went with a BMR K-member at the same time and they fit just fine. No problems...