Anyone running the QA1 adj coilover struts on 2011+ ?

[SSPSTANGBANGER]

Anyone use the QA1 coil-over struts on their 2011+ GT?
opinions? suggestions?
I want to put adjustable struts on my 2011 while doing my M/M c/c plates and alignment. I was thinking of doing the full coilover adj struts or the adj struts that use my lowering springs. Not sure which is best for a street driven car that see's some track time. Its not a daily driver at all though.

This?
http://bmrsuspension.com/?page=products&productid=703
http://bmrsuspension.com/?page=products&productid=590
http://bmrsuspension.com/?page=products&productid=593

or this?
http://www.americanmuscle.com/qa1-adj-strut-0512.html

or?

 

[Clipboard]

no...not one person...at all...ever...

 

[csamsh]

track time as in "road course" or "drag strip?" If it's the former, you don't want the QA1's. There are much better options.

 

[SSPSTANGBANGER]

Sorry forgot to mention racing type:
drag racing

 

[07graygt]

I'm looking to do those pretty soon. I know Matt D is running them too. He started out with the 175# spring and went to the 200. My guess with the weight of the 5.0 you would want 200 or 225. I'm thinking I'm gonna start with the 175 but mines a 3v. Springs are fairly cheap though.

 

[Erickveloz]

I want one of those but only for rear

 

[SSPSTANGBANGER]

I ended up getting some Strange 10-way struts and shocks from UPR to try since they are CHEAP!!
$135/strut $88/shock
I have had good success on my Foxes and my Terminator with them so figure they were cheap enough to try on my Coyote

 

[07graygt]

I was looking at those too. Lets us know what you think. Ill probably run those in the rear and the qa1 up front so I can lower the car more. I'm running the for k springs right now.

 

[SSPSTANGBANGER]

I was looking at those too. Lets us know what you think. Ill probably run those in the rear and the qa1 up front so I can lower the car more. I'm running the for k springs right now.

I will do I plan to do a install write-up on all the suspension I am installing. I and debating doing a k-member with it all also.

 

[07graygt]

I went with the bmr k member. I also did the a arms and radiator support too.