Beefcake Special Sale

beefcake

Forced Induction Specialist
Official Vendor
Joined
Dec 14, 2009
Posts
4,495
Reaction score
30
Location
Bethel, Ohio
We decided to come up with a Tbolt Package for our customers. We were having issues with the pipes not sealing because of some of the clamp sizes in other kits. Paxton has 4 different worm clamp sizes included with their kits, 5 on the Vortech kits.

Most of the T Bolt kits available are limited to 3 sizes. Our kit fills in the gap at the intercooler area. The 3" bolts are too small, and the 3.5" bottom out.

We teamed up with Five Star and Clampco who make some of the best T Bolt clamps out there to offer a kit that addresses these areas. Our Paxton t bolt kits come with 4 sizes of clamps, and our Vortech specific kit will come with 5. The outlet diameter of the Vortech kit is slightly smaller, and the 3" clamp bottoms out there as well. It's not the cheapest kit on the market, but it is definitely the most complete.

http://www.teambeefcakeracing.com/teberavopatb.html

These kits are in stock and ready to ship.

In addition we have been working on getting people into fuel systems out of the gate with their Paxton kits, especially the E85 customers like Tom.

All of our Beefcake Special Packages have been updated with the ability to upgrade with stage 1 fuel systems for gas and for e85.

Our stage 1 system for fuel is an $899 upgrade, and our E85 system which retails for only $1299 is only a $1040 upgrade to the standard package.

We can also customize systems at higher horsepower levels as well.

On top of that, we are offering an additional $150 forum special on our kits right now!
 
Last edited:

beefcake

Forced Induction Specialist
Official Vendor
Joined
Dec 14, 2009
Posts
4,495
Reaction score
30
Location
Bethel, Ohio
What does your e85 system consist of?

S197-S Fuel Pump Module (dual pump)
F1i Fuel Pressure Regulator
F10 Inline Fuel Filter
All fittings, hose, and hardware.
25 feet fuel line
8, compression style billet hose ends
4, low profile 90 degree billet o-ring fittings
3, straight AN to o-ring fittings
8, hose straps with stainless mounting screws
1, 3/8 EFI (female) to AN-8 (male) adapter
2, walbro 465 pumps
1, sealed connector

that's the stage 1


 

DTony

Senior Member
Joined
Jun 24, 2010
Posts
822
Reaction score
0
Location
Ohio
Is it a fore hat? It sounds like a decent system, with id1000s what is it rated for on e85?
 

beefcake

Forced Induction Specialist
Official Vendor
Joined
Dec 14, 2009
Posts
4,495
Reaction score
30
Location
Bethel, Ohio
Is it a fore hat? It sounds like a decent system, with id1000s what is it rated for on e85?

stage 1 conservatively 800rwhp.

Yes, we only use fore stuff. They have the highest quality and machine in house. Never have issues getting parts.
 

nitrobob

Member
Joined
Jun 9, 2011
Posts
270
Reaction score
2
Location
Missouri
Terry

Do you carry a T-Bolt kit for 06 Mustang equipped with a inter cooled Paxton 2200?

Thanks
 

beefcake

Forced Induction Specialist
Official Vendor
Joined
Dec 14, 2009
Posts
4,495
Reaction score
30
Location
Bethel, Ohio
I don't have any premade kits, but we could probably put something together

i'll have to research the sizes of clamps on the kit
 

1sloGT

Member
Joined
May 10, 2011
Posts
235
Reaction score
0
Location
Central TX
Terry

Do you carry a T-Bolt kit for 06 Mustang equipped with a inter cooled Paxton 2200?

Thanks

Hey Terry could you shoot me a pm for the same exact thing when you have a chance? 06 with a paxton 2200, manual. Also add price for all new silicone hoses too. I bought a kit used and most of them got crushed /cut up in shipping.
 

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top