Brembo Kit

[ROUSH06GA]

I have a oppertunity to buy GT 500 14inch brembo kit off a 2010 for a good deal ..
The kit includes, front and rear rotors, pads, calipers, dust shields, brackets.

My first question is will this work on a 2006 without any modifications?
Do I need anything else besides the parts listed above for the installation to be complete.

Here are my current wheel setup will it clear ?
http://www.tirerack.com/wheels/Whee...lse&filterNew=All&filterWeight=All&sort=Brand

thanks

 

[Mike K]

Everything will bolt up as far as the brakes go but I'm not sure on the wheels and if they will clear

 

[MELLOWYELLOW06]

From what I heard from dealer they should work fine on your car. Especially the 2010 to our cars, its mostly cosmetic.


But at 41 offset on a 20 8.5, most likely that wont work. Youll probably need a 25 with that design/style of wheel.

 

[ROUSH06GA]

From what I heard from dealer they should work fine on your car. Especially the 2010 to our cars, its mostly cosmetic.


But at 41 offset on a 20 8.5, most likely that wont work. Youll probably need a 25 with that design/style of wheel.

my front wheel offset is 35.. The rear is 41

 

[MELLOWYELLOW06]

I thought 41 sounded to deep into the fenders but I mis-sread Tire rack site. But I doubt very much 35 offset will work. You should be pretty tight to your calipers up front already. How much space do you have to the spoke riht now?

If brakes are a good deal, grab them and then see how much clearance you will need.

 

[2BlownStangs]

I would get them

 

[ROUSH06GA]

I thought 41 sounded to deep into the fenders but I mis-sread Tire rack site. But I doubt very much 35 offset will work. You should be pretty tight to your calipers up front already. How much space do you have to the spoke riht now?

If brakes are a good deal, grab them and then see how much clearance you will need.

I just checked the space between the calipers, I can hardly fit my pinky finger in there.

 

[kevinatfms]

no they will not fit, you need to use spacers or get a set of wheels for gt500 brakes.

 

[HellsBells]

You should get them and sell them to me. Seriously.

 

[ROUSH06GA]

You should get them and sell them to me. Seriously.

I thought ab that but my luck no one will buy them haha. if your serious send me a pm and we can talk about it

 

[Barricade]

So an 18x9 with a +24mm wont work eh? Rats....
How about an 18 X 10 with a +40mm????

Can any of yall interpret this for me please?? lol

Brembo GT500 brake Kit template.pdf

 

[ROUSH06GA]

no they will not fit, you need to use spacers or get a set of wheels for gt500 brakes.

can you please post the spacer needed/best to make it work. Im not familiar with the spacer market. thanks

 

[Barricade]

Spacers are dangerous.....Id rather get bigger wheels.....but hey...thats just me.

 

[kevinatfms]

the template is the out diameter of the caliper, line the bolt marks of the template to your spindle and you will see how big of a wheel you need.

 

[Chritaka]

I thought ab that but my luck no one will buy them haha. if your serious send me a pm and we can talk about it

If HellsBells doesn't, I would be interested. I know they will work with my Razors. I missed out on the ones listed in the classifieds today...

 

[ROUSH06GA]

If HellsBells doesn't, I would be interested. I know they will work with my Razors. I missed out on the ones listed in the classifieds today...

Pm sent