Catch Can Setup For Saleen Supercharged Guys?

[bmaxwell]

So, I am only running breathers and oil is spewing outta the breather everywhere on the passenger side and I believe a little bit on the driver side. Most of the catch can setups I have seen are only setup on the driver side and leave the passenger side either with a breather or still circulating back into the motor. I would appreciate it if some of you guys could help me out! Thanks!

 

[luckychance]

i believe you need breathers on both sides if you want to get rid of the pvc system. i had the same issues with just breathers. then most of the breather cans i tried didnt work due to cheap baffling. i tried everything from longer hoses to putting wrist bands on the breathers. i finally found this guy guy who makes the best catch cans period. hell work with you to design fully customized internals. i took some of the baffle ideas from the different catch cans i had used and added to his design (ie more baffling). end result - zero blow by on breather cans, the filter still looks like new compared with old ones. and hes pretty reasonable only drawback is since its custom made it takes about 2 weeks to make.

http://www.saikoumichi.com/

 

[matt06]

you can buy a catch can with 2 inlets and a breather on top from jegs/ summit. the one i had was a moroso i believe.

 

[bmaxwell]

Thanks for replying guys. I was thinking I can just run two hoses from each valve cover but I'll figure something out

 

[scramblr]

I left a breather on the drivers side and use a Stefs breather can for the passenger side. No more oil mist anywhere.

 

[AnotherS197GT]

Get this. No more oil.

http://focus.c-f-m.com/cfmbilletvalvecoverbreatherkitfor2005-08fordmustanggt.aspx?dc=allfordmustangs

 

[908ssp]

Read this. http://www.enginebasics.com/Engine%20Basics%20Root%20Folder/Crankcase%20Ventilation.html