Enabling/disabling the perimeter lighting feature Your vehicle comes with the perimeter lighting feature enabled. You may enable/disable this feature by having your vehicle serviced by your authorized dealer. You may also perform the following power door lock sequence to enable/disable the perimeter lamps feature. All vehicle doors must be closed before beginning the procedure. You must complete Steps 1–3 within 30 seconds, or the procedure will have to be repeated. 1. Turn the ignition to the 3 (ON) position, then press the control three times. 2. Turn the ignition to the 1 (OFF) position, then press the control three times. 3. Turn the ignition to the 3 (ON) position; the horn will chirp to indicate the driver configuration mode has been activated. Activating or deactivating the perimeter lighting once in program mode is accomplished by:
•
pressing the trim panel power door unlock control ( ) twice within
five seconds.
It didn't paste correctly, but every time it says "press control" in the above instructions, it's talking about the unlock button on your remote.
Thanks Alloy, I dont have my manual because it was stolen when my car was broken into so I appreciate you taking the time to write that up for me. Thanks a lot.
I just tried it, and it didn't work. It says disabling the perimeter lighting, is that what I am talking about? When my headlights turn on when I use my keyless entry??