FS: D&D T-56 with everything **SOLD**

[_M_]

For sale:

NEW PRICE $2200 shipped to lower 48 or $1900 if you can pick it up in Memphis...thats for everything below. Killer deal. Just want it gone, no room to bring it home and sit on it.

D&D T-56 S197 kit
Driveshaft
centerforce DFX clutch (~1000miles)
Brand new Billet Products GTO shifter http://www.billetproducts.com.au/gto.html

Around 5500-6000 miles on this tranny all babied street use.

$2700 shipped to lower 48, or if you are within a few hundred miles of memphis $2500 and i'll meet you half way.

 

[LBSRACING]

This is a great deal. I paid more than that to just have my D&D repaired. Good luck on the sale.

 

[07 s197]

Is this still a 10 spline tranny? would you sell without the clutch?

 

[_M_]

It's 26 spline. I'd prefer to sell it all. You can take the clutch and sell it to someone else. But I might make an exception. PM with an offer but realize that's the least expensive piece of the whole package

 

[_M_]

bump

 

[_M_]

bump

 

[paydirt]

does this come with the tranny mount?

 

[ZmanM3]

Killer deal. Thats about 300 less then I paid for mine with out a clutch and I had to go pick it up.

 

[ZmanM3]

Dang, sweet shifter too, did you have to cut the trans tunnel at all with it?

 

[Chris06GT]

PM sent.....

 

[_M_]

Dang, sweet shifter too, did you have to cut the trans tunnel at all with it?

yes slightly but nothing bad, the shifter is as good as it gets for that set-up. $500 bones for that thing and I literally just bought it

 

[ZmanM3]

It looks pretty sweet.

 

[Skarkull]

For sale:

NEW PRICE $2200 shipped to lower 48 or $1900 if you can pick it up in Memphis...thats for everything below. Killer deal. Just want it gone, no room to bring it home and sit on it.

D&D T-56 S197 kit
Driveshaft
centerforce DFX clutch (~1000miles)
Brand new Billet Products GTO shifter http://www.billetproducts.com.au/gto.html

Around 5500-6000 miles on this tranny all babied street use.

$2700 shipped to lower 48, or if you are within a few hundred miles of memphis $2500 and i'll meet you half way.

So, a few questions,

1.) Could you post a pic of the modification that you did to the trans tunner to make the shifter work?

2.) D&D kit comes with a tranny mount, but you didn't answer the previous quesiton, does it have a tranny mount.

3.) D&D kit does not come with a flywheel, does the stock one fit or will you need on of those too?

4.) Is there anything missing at all from the kit that would keep the buyer from hooking it up as is?

5.) What is the weight, cause I'm in the Army, stationed in Europe. I get USPS but they have weight restrictions.

Thanks for any info you can provide.

SGT James Trousdale
U.S. Army
Wiesbaden, Germany

 

[EagleStroker]

Where is it at in Memphis?

 

[_M_]

does this come with the tranny mount?

if youre talking about the cross member...yes it comes with it

 

[_M_]

So, a few questions,

1.) Could you post a pic of the modification that you did to the trans tunner to make the shifter work?

I'll have to see if the shop can send me one...they just just trimmed a bit of the sheetmetal back, nothing major

2.) D&D kit comes with a tranny mount, but you didn't answer the previous quesiton, does it have a tranny mount.

Yes, see above

3.) D&D kit does not come with a flywheel, does the stock one fit or will you need on of those too?

It doesnt come with a clutch either...I'm throwing in the Centerforce clutch. Should work with your stock flywheel. I would have it resurfaced though.

4.) Is there anything missing at all from the kit that would keep the buyer from hooking it up as is?

The crappy stock shifter is missing. On the serious side...nothing is missing

5.) What is the weight, cause I'm in the Army, stationed in Europe. I get USPS but they have weight restrictions.

No idea, I'd have to weigh it

Thanks for any info you can provide. No prob

SGT James Trousdale
U.S. Army
Wiesbaden, Germany

Let me know if you have any other questions, but I have a deal pending. Just waiting on confirmation.

 

[Grip]

Wow....if noone minds me beating a dead horse..this really IS a good deal.

He's asking $800 less than I sold MY T-56 for!

 

[_M_]

Wow....if noone minds me beating a dead horse..this really IS a good deal.

He's asking $800 less than I sold MY T-56 for!

I certainly dont mind. Although I think its most likely sold. I've always been fair with my prices when I sell my used parts. Mostly because I can be, so I figure why not help out a fellow forum member and Mustang enthusiast.

 

[_M_]

SOLD

SOLD