FS: Nitto NT05's

Status
Not open for further replies.

Department Of Boost

Alpha Geek
Joined
May 26, 2010
Posts
8,808
Reaction score
31
Nitto NT05’s
(not the NT05R drag radials)

Fronts:
275/40-18 x2
Overall diameter 26.57”
Overall width 10.79”
Recommended rim width 9.0-(9.5)-11.0

Rears:
295/35-18 x2
Overall diameter 26.18”
Overall width 11.61”
Recommended rim width 10.0-(10.5)-11.5

These tires have about 1000mi on them. I swapped them out for Toyo R888r’s (race tire). There is absolutely nothing wrong with them. The rear tires have lived a pretty rough life though. The car they came off of has 650+hp so they got spun a lot.

The advertised tread depth (I never measured them new so I am taking their word for it) is 5.715mm (1/32”x7.2).

The front tires have a current tread depth of 5mm, which means they have 87.5% of their original tread depth left.

The front tires have a current tread depth of 4mm, which means they have 70% of their original tread depth left.

All things considered they have a ton of life left in them.

For more info click on the Nitto tire page here:
http://www.nittotire.com/Tire/nt05#overview

Shipping:

Obviously these are kind of a PITA to ship. I calculated it a few different ways and it looks like “banding” a front and rear together and shipping them as a unit is the best option (there would be two bundles). I played around with shipping locations and it is in your best interest to have them shipped to a real commercial address. It could cost as much as half what it would cost to get them shipped to your house. HALF!

Shipping looks like it will cost between $75-125 depending on where they are going. If you want to PM me your full address and if it is or is not a commercial address I can give you a shipping quote.

Payment:

Payment can be done through PayPal. Once we figure out a deal I will give you payment info. I work on a first pay first serve basis. I do not hold spots in “line”, sorry.

These tires retail for $988 through Discount tire.

My price: $450 + shipping
(I will not split them up)

Please PM me with any questions you have.

DSCN4391.jpg

 
Last edited:

FR500GT

Senior Member
Joined
Jul 6, 2009
Posts
1,728
Reaction score
0
Location
Orange County, CA
Damnit if these were 295's all around I would take them...I am literally ordering the same set tonight! Bump for you
 

Department Of Boost

Alpha Geek
Joined
May 26, 2010
Posts
8,808
Reaction score
31
Damnit if these were 295's all around I would take them...I am literally ordering the same set tonight! Bump for you

Have you tried fitting 295's on the front yet? I just put my 275's R888's (which measure about 281mm) on and had to run 1/4" wheel spacers.

I'm not sure how people get 315's on there without some serious surgury.

I wanted to go with 305's on the front but there was no way that was going to happen, I tried.
 
Status
Not open for further replies.

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top