JPC Turbo Kit? Race setup

gray1622

Member
Joined
Apr 7, 2009
Posts
530
Reaction score
0
Location
Norman, OK.
They'll work without the A/C compressor installed. Passenger side manifold needs a little ground off the corner, that's about it.

Kev

I wonder if there is a way to move the A/C compressor so that it will clear? A spacer or something.....
 

dougie b

Senior Member
Joined
Dec 13, 2008
Posts
1,203
Reaction score
2
ummm why couldn't you have built this BEFORE i finished my blower setup.....

looks great guys! I may consider this later in my boosted endeavors...
 

slicksilver

Member
Joined
Mar 15, 2008
Posts
310
Reaction score
1
Location
NC
Yes, this is awesome. Looks WAY more simple than the other kits with piping freaking going EVERYWHERE.

I am a minimalist when it comes to stuff like this, so it appreals to me.

If I can have something that looks as simple as this, but retains factory AC and PS, Im interested
 

Wicked97

Senior Member
Joined
Aug 25, 2010
Posts
1,617
Reaction score
1
Location
Beltsville, MD
ac will not be an option at this time. Might(very big might) be something we look in to. This system is more geared for performance oriented cars, not as much towards the guys who want to take long trips to the beach. lol the overall goal with this was to keep weight down as much as possible, Increased spool times, with a very simplistic approach. i think we hit the nail on the head.

we are going to work some figures up on pricing, but all these are made in house by hand so its not going to be 700 bucks or anything. we do want to offer it as a Pipe kit only at this time, then you can reuse your intercooler or buy the turbo/waste gates you want.
 

LTHLCHRG

Member
Joined
Feb 27, 2009
Posts
358
Reaction score
1
Location
Toronto,Canada
ac will not be an option at this time. Might(very big might) be something we look in to. This system is more geared for performance oriented cars, not as much towards the guys who want to take long trips to the beach. lol the overall goal with this was to keep weight down as much as possible, Increased spool times, with a very simplistic approach. i think we hit the nail on the head.

we are going to work some figures up on pricing, but all these are made in house by hand so its not going to be 700 bucks or anything. we do want to offer it as a Pipe kit only at this time, then you can reuse your intercooler or buy the turbo/waste gates you want.

Will that be hot and cold side piping?
 

LTHLCHRG

Member
Joined
Feb 27, 2009
Posts
358
Reaction score
1
Location
Toronto,Canada
Sorry, I'll use the multi-quote button next time lol

It would have a real short belt just to drive the alternator and water pump like on my car. Extremely easy to work on as all belt routing is on the opposite side of the engine(passenger side). No P/S or A/C on this car. P/S could be a possibility with this kit.

Kev

Kev,could you explain what would have to be done to use p/s.
 

Wicked97

Senior Member
Joined
Aug 25, 2010
Posts
1,617
Reaction score
1
Location
Beltsville, MD
Will the kit work with a bmr k- member

yes we built this kit with a BMR k member on the car, so yes it will fit

Kev,could you explain what would have to be done to use p/s.

We are working on this, looks like you can relocate your pump like an older mod motor. hope to have an good answer for this by the end of the week.
 

kevmac

Junior Member
Joined
Apr 14, 2010
Posts
43
Reaction score
0
I was going to ask about plans with an alternator...I didnt see one in the first few pics and didn't look like it would fit, but then a couple pics showed it installed.

Yep, even though the car is being de-accessorized it will still be street driven and need the charging system.
 

BoostedGT480

Slow 3v
Joined
Dec 5, 2010
Posts
3,076
Reaction score
0
Location
Montgomery, AL
^Thats what I was trying to figure out. At first it didn't look like there was room for it to fit with the turbo housing and all the piping right in front. Once I seen it installed I could see there was plenty of room though.


Kit looks really good and clean.
 

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top