Need a measurement for swap

[48prerunner]

Would anybody be able to measure the distance from the water pump pulley face to the back of the fan. I'm swapping a 5.0 crate into my 69 f-100 I have mustang rad, 2013 fan, bottle etc. Trying to make it so I can use stock hoses and ac if possible. I asked on a couple other forums got 154 views no answers.

 

[Thereaper]

Not sure if this will help.

 

[1179]

On a stock 2011 GT there is about 4" between the water pump snout and the fan housing, they are not in horizontal alignment, the waterpump is offset a small amount to the drivers side .I have completed a Boss 5.0 to a 93 LX swap. If I could be of any help let me know.

 

[48prerunner]

Thanks That will help alot. I have the engine in the frame and trying to finalize rad placement.
I have a 2013 fan on the way now hope it will be here this week. I have about 5" betwen the air tube and rad support.