New gen TVS blower whine?

[popeye]

In a video clip of a Roush TVS on a 5.0 the blower whine was pretty faint. I had a Magnuson and it was whisper quiet.
I have a project coming up this summer and will be using a TVS blower. Do the FRPP whipple kits still have that great audible whine to them or are all of the TVS blowers quiet now adays? A quiet blower won't ruin my day but I loved the M122 whine. Just want to use a move efficient blower.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[Fullboogie]

The TVS's don't make much noise at all. Lite whistle when going WOT, but that's it.

 

[popeye]

Are the Whipple versions any louder?

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[GallopingFord]

I feel like the 2.3L TVS on my GT500 is pretty audible, no pulley either. Obviously it's no Eaton from a Cobra or a 07-12 GT500 with a pulley, but still.

 

[Doug M]

ummm 5.8

 

[Mystickeith50]

My 2011 whipple is audible..lol....my uncle has a 2010 with a 2.3 tvs pushing 18lbs and it's very audible lol.

 

[skwerl]

If you can't hear your TVS then you aren't spinning it fast enough.

 

[JLear]

Both the Whipple and TVS scream!

My 2.9 Whipple



s174's TVS



Edit, sorry but I just reread the title where op was asking about new gen tvs and someone else mentioned whipple.

 

[popeye]

No that answers the question very well on the Whipple having the scream. Thanks for the vid

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[luckychance]

past 15psi and the tvs will come alive, mine is at 18 and it screams

 

[Fullboogie]

Well, mine's at 17 and I can barely hear it. No complaints - it puts out the power.

 

[Mystickeith50]

I think a lot has to do with exhaust note as well. My uncle can't hear his either in the car but outside it whines like a mofo.

 

[ksack]

My Magnuson TVS1900 whined pretty good with a 9lb pulley. It's no 03 Cobra but it still makes a racket

 

[crownaviation]

My 2013 tvs was much quieter than my ported m122 was but still loud enough to hear in the car over exhaust and radio lol. I ran the JLT carbon fiber 127 cai at the time with both blowers. This pull was with a 2.4" lower, 10% overdrive crank pulley shifting at 6500 rpm. Made just a bit over 23lbs of boost on my 3v. Carbon fiber intake tube makes a huge difference also. The stock intake tube has a massive muffler to be able to sell to those pussies in California. Here in the Midwest.. make as much noise as you want lol

 

[BruceH]

In a video clip of a Roush TVS on a 5.0 the blower whine was pretty faint. I had a Magnuson and it was whisper quiet.
I have a project coming up this summer and will be using a TVS blower. Do the FRPP whipple kits still have that great audible whine to them or are all of the TVS blowers quiet now adays? A quiet blower won't ruin my day but I loved the M122 whine. Just want to use a move efficient blower.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

FYI the Whipple is a twin screw, not a roots like the tvs. It's also a Whipple blower, the tvs is made by Eaton.

I loved the sound my Whipple made. Like sqwerl said for more noise spin it faster.

 

[crownaviation]

FYI the Whipple is a twin screw, not a roots like the tvs. It's also a Whipple blower, the tvs is made by Eaton.

I loved the sound my Whipple made. Like sqwerl said for more noise spin it faster.

Agree with what someone already mentioned.. it could make a pussy fart sound or "quief..?" as long as it made power I can give two shits lol

 

[BruceH]

Agree with what someone already mentioned.. it could make a pussy fart sound or "quief..?" as long as it made power I can give two shits lol

And what are you running with the r spec manifold? Whipple 3.4? Does it make that noise, rrrrrr?

 

[crownaviation]

And what are you running with the r spec manifold? Whipple 3.4? Does it make that noise, rrrrrr?

I hope so! Have not got all my stuff back from all the machine shops. Now having L&M build me a set of their custom pistions.. so that will take 4-6 weeks. This is the longest it has taken me to build a motor but the wait will be worth it, rather than "settle". But yes for now just the 3.4L Whipple with the crusher inlet

but.. good grief it is getting expensive

 

[Ryan331]

With magnapacks I couldn't hear my whipple at all.. With magnaflows, the whine is there.. I'm good with that! The magnapacks weren't my style anyway..

My 03 Regal GS with a ported Gen 3 "h"eaton at 12 PSI whined crazy loud, though. Wish that car weren't FWD, I'd still have it lol