Oem HID's in non-HID car?!?

[HOLYWD]

I have acquired a set of 2011 oem hid lights from my friends son's car but my 2012 car is a non-HID model. Anyone know what it will take to make it work ?
HID car

NON-HID car

Any and all help is appreciated!

 

[1SonicGT]

cut, splice and soder my friend lol

 

[HOLYWD]

cut, splice and soder my friend lol

Same wires diff plugs ?

 

[1SonicGT]

Same wires diff plugs ?

Did that for my mustang, Had GT500 HID's that I took out before I sold it and then spliced and wired them into the GT. Work perfect not a issue.

 

[rford426]

Ford has a hid harness for 05-09 cars I'm not sure bout 11+

 

[HOLYWD]

Did that for my mustang, Had GT500 HID's that I took out before I sold it and then spliced and wired them into the GT. Work perfect not a issue.

Just swapped plugs?

 

[gtcs07]

If its like the 05-09 the harness is completely different and had relays built in for the hids. I just did this and even having the correct harness i still had to solder in 2 diodes for them to work right

 

[HOLYWD]

If its like the 05-09 the harness is completely different and had relays built in for the hids. I just did this and even having the correct harness i still had to solder in 2 diodes for them to work right

damn !

 

[gtcs07]

Yup sort of a pain in the aas

 

[HOLYWD]

Yup sort of a pain in the aas

so you did factory hid's in your 07 ?

 

[gtcs07]

No bought them then sold them to a friend with an 07 roush but i did the install

 

[HOLYWD]

oh ok . damn . I may install or I might just sell them . depends on how much wiring and stuff is involved . I really love the way they look though !!!

 

[gtcs07]

There are how tos on how to convert the harness to hid but i would look into just buying the harness

 

[HOLYWD]

There are how tos on how to convert the harness to hid but i would look into just buying the harness

how does the replacement harness connect ?

 

[JEWC_Motorsports]

Caleb what all did you get for the hids?

 

[gtcs07]

Its a whole section of the fuse box replaced.

 

[rford426]

Caleb install them just a little bit of wiring I put the factory gt500 hid in my car and wasn't bad at all

 

[HOLYWD]

Caleb install them just a little bit of wiring I put the factory gt500 hid in my car and wasn't bad at all

I'll sit down and look at them this week.

 

[rford426]

There is a good DIY write up floating around somewhere idk if its on here or where ill try and look for you but it is the one I used and was step by step with PN's and all for the diodes from radioshack. But there is NO way in hell if i had oem PROJECTOR HIDS that I would not install them. I am in love with the oem projectors. Retrofit is on my long list of to dos to OL black before i call her done

 

[HOLYWD]

Alright I'll try and find it too.