Official APEX Wheels Showroom Gallery Thread

[ApexRaceParts]

Check out Formula D driver Justin Pawlak's 2017 Roush Performance P51D prototype on a set of 18" APEX EC-7s in Matte Bronze!

APEX Wheel Fitment Specs:

• Front/Rear: 18x11" ET52 EC-7s with 315/30-18 Falken 615K+ tires

Owner's Instagram

 

[ApexRaceParts]

Take a look at our customer Steve's track prepped 2018 GT on a set of 19" APEX SM-10 wheels in Race Silver.

APEX Wheel Fitment Specs:

• Front/Rear: 19x11" ET52 SM-10 with 305/3019 tires
• Additional Modifications: 25mm front spacer with extended studs

 

[ApexRaceParts]

Steeda S550 Race Car on a set of 18" APEX EC-7s in Satin Black finish.

APEX Wheel Fitment Specs

• Front/Rear: 18x11" ET52 EC-7 with Nitto NT01 tires
• Suspension: Steeda Race Suspension
• Additional Modifications: 25mm front spacer and ARP extended studs

 

[ApexRaceParts]

Here's a couple more shots of Drew's Boss 302 with 18" Bronze EC-7 wheels.

APEX Wheel Fitment Specs:

• Front/Rear: 18x11" ET52 with 30/65-18 Michelin S9M Race Slicks
• Additional mods: 25mm front spacer, 1/4" rear spacer, and ARP extended studs

 

[ApexRaceParts]

Here's a few more great photos of Justin Pawlak's Roush Performance P51D.

APEX Wheel Fitment Specs:

• Front/Rear: 18x11" ET52 EC-7 in Matte Bronze with 315/30-18 Falken RT615k tires

Owner's Instagram

 

[ApexRaceParts]

F.A.S.T. Auto Racing GT350R Race Car with 18" EC-7 wheels at COTA

APEX Wheel Fitment Specs

• Front/Rear: 18x11" ET52 EC-7 in Race Silver with 305/660 Pirelli Slicks
• AP Racing Brakes

Owner's Instagram: @fastautoracing

 

[ApexRaceParts]

Got some great customer submitted photos of an S550 on a square 18" EC-7s setup in Bronze Finish with some meaty tires!

APEX Wheel Fitment Specs:

• Front/Rear: 18x9.5" ET35 with 275/45-18 Bridgestone Potenza S007As
• Suspension: Stock dampers with Eibach Sportline lowering springs (Reported no rubbing at all)

 

[ApexRaceParts]

Here are some more good closeup photos of the DIG Motorsports S197 at PIR.

APEX Wheel Fitment Specs:

• Front/Rear: 18x11" ET52 EC-7s in Bronze Finish
• Tires: 305/645-18 Pirelli DH Slicks

 

[Gabe]

I need some 11"-wide wheels in my life

 

[ApexRaceParts]

Jeff's 2017 Shelby GT350 with 19" EC-7 Wheels in Satin Black

APEX Wheel Fitment Specs:

• Front/Rear: 19x11" ET52 EC-7 with Bridgestone RE-71R 305/30/19 Tires
• Suspension: Ford Performance Springs and Maximum Motorsports Camber Plates
• Hardware: 25MM Front Spacers with ARP Extended Studs Front and Rear

Owner's Instagram: @thejeffashton

 

[ApexRaceParts]

Some good rolling shots of Matt's S197 with APEX EC-7 wheels.

APEX Wheel Fitment Specs:

• Front/Rear: 18x10" ET43 EC-7 Wheels in Satin Black swith 295/35-18 Michelin Pilot Super Sport Tires
• Additional modifications: ARP 3" Wheel Studs, Vorshlag Lugs , 15mm spacer

Owner's Instagram: @mattthecarman

 

[LarryJM]

All this talk about spacers being trash with base 18 inch wheels.

 

[ApexRaceParts]

Massimo's S197 on 19" APEX SM-10 wheels in Anthracite Finish

APEX Wheel Fitment Specs:

• Front/Rear: 19x10" ET40 with Michelin PS4S Tires

Owner's Instagram: @massimo.raw

 

[Erik Withak]

Massimo's S197 on 19" APEX SM-10 wheels in Anthracite Finish

APEX Wheel Fitment Specs:

• Front/Rear: 19x10" ET40 with Michelin PS4S Tires

Owner's Instagram: @massimo.raw

What size wheels?

 

[Erik Withak]

I ment to say What size tires? not wheels. Sorry....

 

[ApexRaceParts]

Zooming in on the second picture at max brightness, these look to be 285/35-19. That is our go to recommendation for that wheel and works as a direct fit on the S550!

-Ian

 

[ApexRaceParts]

Our customer Mark's GT350 rocking the perfect 19x11" rotate-able square fitment in our SM-10 model.

APEX Wheel Fitment Specs:

• Front/Rear: 19x11" ET52 SM-10 in Satin Black with 305/30-19 Bridgestone RE-71R tires
• Additional mods: 25mm front spacer and ARP extended studs

Owner's Instagram: @markjardine

​

 

[ApexRaceParts]

Nik Romano's Fast Sideways S197 Mustang GT:

APEX Wheel Fitment Specs:

• Front/Rear: 18x10" ET40 APEX EC-7 Wheels in Satin Black Finish with 275/35-18 Federal RS-R Tires

Photography: @sharplitemedia​

 

[ApexRaceParts]

With our first batch of 18" Sprint Forged wheels shipping out in the next few weeks, the time has come to add these beauties to our Showroom Gallery thread. We hope to see a lot more of these in the near future!

First off will be Alessandro's beautiful TT2 Championship winning S550 GT, sporting 18x11" ET52 all around with 315/30-18 tires and a full catalog of suspension upgrades.

- Cory

 

[Apharaoh06]

I just purchased a set of 18 x 10" VS5-RS for my 2007 GT500. Wheels hit my stock front calipers. I am currently running the Apex 18 x 10" EC-7 with no issues. Quality control needs to be checked on these wheels. At around $800 + a wheel retail or direct with shipping, this is not cool.