Fake_Snake
FAUX GT500
OK up for sale is my gauge set up i can sell single set up (ie: gauge plus sensor module and sensor module (ie: boost/iat/afr), or 2 gauges or a 3 gauges .. Reason Im selling them is i would prefer something "simpler" these gauges have many features i dont use and at the time i thought I was a "BALLER so dropped the 1K plu for the set up..
1) the black and red power wires are already set to run from under the driver side dash right next to your left foot agaisnt the wall around the back of the center section and into your passenger side fuse panel with the grounds running past that to the two factory bolts by the fuse box.. 2005-2009 should be plug and play no wiring needed on your end.
with an add a fuse already spliced on the end.
3) Parts you will need to get if you dont purchase all three are 2 terminal jumpers tiny cheap ones from radio shack there common size per the tech rep today on the phone and thats why they dont list them on there site to purchase.
4) If you purchase the IAT sensor you will need to purchase this k thermocoupler from plx or one of there vendors ( i had the older version that had electrical interference and never bought a new one):
new temp sensor $79
http://www.plxdevices.com/product_info.php?id=ACCEAITSK
5) If you go witht the boost/vac set up it will only come with rubber fitting from sensor to tube you will need purchase your own T fitting from autozone (apx $1.99)
6) AFR sensor is about 8 months old of which about the car has only be driven about 5 of those months if that. It was dead accurate on a recent dyno A/F sensor under WOT and about .2 off under normal crusie at some points
each gauge is still pretty much LIKE new condition. the screens are all scratch free and will be wrapped up good upon shipping.
Price's
new are:
PLX DM-100 SM BOOST combo
$289 http://www.tricktuners.com/product/PLX_DM-100_SM-BOOST_/PLX-Dm-100-SM-Boost-combo/
MY PRICE 1 gauge and boost module $215
PLX DM-100 SM AFR combo
$379 http://www.tricktuners.com/product/PLX_DM100-SMAFR/PLX-DM-100-Wideband-combo/
MY PRICE 1 gauge and AFR module $255 ( leave you room to purchase a new bung and a sensor if you want to)
PLX IAT module w/ sensor
$135 http://www.tricktuners.com/product/PLX_SM-AIT/PLX-SM-AIT-Air-Intake-Temp-Sensor/
IAT module only no sensor $50
To give you an idea on how much just the gauges run ONLY
PLX DM-100 Digital Multi gauge and sensor module
$269
http://www.tricktuners.com/product/PLX_DM-100/PLX-DM-100-Digital-Multi-Gauge/
SOrry this is long but i tried to make it informative due to the amount of question i got last time i thought about selling them across several boards. SO dont be alarmed if you see the same FS ad on several different mustang sites. Items will be pulled when sold
From PLX device webpage DM-100's in action
http://youtu.be/25qU-hsbCMQ
1) the black and red power wires are already set to run from under the driver side dash right next to your left foot agaisnt the wall around the back of the center section and into your passenger side fuse panel with the grounds running past that to the two factory bolts by the fuse box.. 2005-2009 should be plug and play no wiring needed on your end.
with an add a fuse already spliced on the end.
3) Parts you will need to get if you dont purchase all three are 2 terminal jumpers tiny cheap ones from radio shack there common size per the tech rep today on the phone and thats why they dont list them on there site to purchase.
4) If you purchase the IAT sensor you will need to purchase this k thermocoupler from plx or one of there vendors ( i had the older version that had electrical interference and never bought a new one):
new temp sensor $79
http://www.plxdevices.com/product_info.php?id=ACCEAITSK
5) If you go witht the boost/vac set up it will only come with rubber fitting from sensor to tube you will need purchase your own T fitting from autozone (apx $1.99)
6) AFR sensor is about 8 months old of which about the car has only be driven about 5 of those months if that. It was dead accurate on a recent dyno A/F sensor under WOT and about .2 off under normal crusie at some points
each gauge is still pretty much LIKE new condition. the screens are all scratch free and will be wrapped up good upon shipping.
Price's
new are:
PLX DM-100 SM BOOST combo
$289 http://www.tricktuners.com/product/PLX_DM-100_SM-BOOST_/PLX-Dm-100-SM-Boost-combo/
MY PRICE 1 gauge and boost module $215
PLX DM-100 SM AFR combo
$379 http://www.tricktuners.com/product/PLX_DM100-SMAFR/PLX-DM-100-Wideband-combo/
MY PRICE 1 gauge and AFR module $255 ( leave you room to purchase a new bung and a sensor if you want to)
PLX IAT module w/ sensor
$135 http://www.tricktuners.com/product/PLX_SM-AIT/PLX-SM-AIT-Air-Intake-Temp-Sensor/
IAT module only no sensor $50
To give you an idea on how much just the gauges run ONLY
PLX DM-100 Digital Multi gauge and sensor module
$269
http://www.tricktuners.com/product/PLX_DM-100/PLX-DM-100-Digital-Multi-Gauge/
SOrry this is long but i tried to make it informative due to the amount of question i got last time i thought about selling them across several boards. SO dont be alarmed if you see the same FS ad on several different mustang sites. Items will be pulled when sold
From PLX device webpage DM-100's in action
http://youtu.be/25qU-hsbCMQ
Last edited:
