Rangersfan
Senior Member
Just thought some of the people doubting the APC's capabilities might like this. Here's a fuzzy set of videos of our shop Q500 at the Moroso 1/4 mile this past Saturday. The following is the writeup by Scott, who owns the red Steeda foxbody you see in our catalog.
"So with the Calibration and a Bolt-on Whipple kit, High flow X pipe and a cat back system the Beast went 119.34mph in the Quarter . That’s with NO DYNO TUNING!!! Just Bolt on the Blower and Go!! I was blown away that a car that drives like stock with 3.55 gears was able to do that. I was on 18" Nitto R-II's and I left the air at the road race friendly 35psi. Full road race swaybars, shocks and struts on the car too. We were also testing the New Watts link system in the rear of the car which seemed to work great as I was still able to manage a 1.78 sixty foots with the "non-drag" setup. "
Needless to say I was impressed that a car with a full 3year/36,000 mile warranty could pull off a 11.87 @ 119.34mph with completely the wrong suspension set-up!
http://s272.photobucket.com/albums/j...=BodavsJoe.flv
http://s272.photobucket.com/albums/j...rent=Boda2.flv
"So with the Calibration and a Bolt-on Whipple kit, High flow X pipe and a cat back system the Beast went 119.34mph in the Quarter . That’s with NO DYNO TUNING!!! Just Bolt on the Blower and Go!! I was blown away that a car that drives like stock with 3.55 gears was able to do that. I was on 18" Nitto R-II's and I left the air at the road race friendly 35psi. Full road race swaybars, shocks and struts on the car too. We were also testing the New Watts link system in the rear of the car which seemed to work great as I was still able to manage a 1.78 sixty foots with the "non-drag" setup. "
Needless to say I was impressed that a car with a full 3year/36,000 mile warranty could pull off a 11.87 @ 119.34mph with completely the wrong suspension set-up!
http://s272.photobucket.com/albums/j...=BodavsJoe.flv
http://s272.photobucket.com/albums/j...rent=Boda2.flv
