SPC caster camber

[crazyhorse]

caster camber

I have a new in box SPC caster camber plates that I don’t need at this time. Got them from a friend but don’t have any plans on lowering my car for awhile. Opened one of the bags just to look at the parts. The other set is still as it came from the factory. Here is the link from the website.

http://www.spcalignment.com/PROD_DIR/SPC_PROD_SEARCH_DYN.cfm?cmd=Cam&cmd2=72040&cmd3=

Looking for $175 shipping included.

[/IMG]

[/IMG]

 

[crazyhorse]

bump..

 

[crazyhorse]

bump...

 

[crazyhorse]

bump.

 

[crazyhorse]

anyone??

 

[Kidd]

I am Interested but I noticed on the sites mod notes for the part that they will require some cutting of the strut towers. how much cutting am I looking at here?

 

[whyask]

Off topic and free bump ! Im in Rocklin bro !!! nice to see someone close to me on the forums as well !

 

[Ken04]

I am Interested but I noticed on the sites mod notes for the part that they will require some cutting of the strut towers. how much cutting am I looking at here?

you must not have read too much of it. From the site;

11. Before reinstalling strut, use supplied template #98042 to cut slots (or cut hole in strut tower to 3.5 inches) on upper strut tower in order to adjust mount when installed in the vehicle. If no slots are cut the button head bolt should now be tightened to 35-40 lb-ft (47-54 Nm).

 

[crazyhorse]

I do have the template that came with the kit. It is the circle paper below the box with the cut out in the center in the first picture.

 

[crazyhorse]

Off topic and free bump ! Im in Rocklin bro !!! nice to see someone close to me on the forums as well !

I think I have seen your car around town before. Looks good.

 

[Kidd]

you must not have read too much of it. From the site;

My bad, I've been having trouble with sites not loading properly so I did just see the part and a small description. Thanks man

Crazyhorse......I think I will hold off on buying. I honestly don't want to go cutting on my car since I'm debating trading it in on a 5.0
Thanks for the response and good luck with selling them. That's a great deal on them.

 

[Ken04]

you must not have read too much of it. From the site;

My bad, I've been having trouble with sites not loading properly so I did just see the part and a small description. Thanks man

Crazyhorse......I think I will hold off on buying. I honestly don't want to go cutting on my car since I'm debating trading it in on a 5.0
Thanks for the response and good luck with selling them. That's a great deal on them.

honestly, the cutting is extremely minor and it won't be noticable once the cc plate is on. An 1/8" of an inch on top of 24" of strut will adjust alot. But if you're going 5.0, good luck ! That's a beast of an engine.

 

[crazyhorse]

Still available....

 

[crazyhorse]

TTT...

 

[crazyhorse]

still for sale..

 

[crazyhorse]

bump

 

[Kidd]

honestly, the cutting is extremely minor and it won't be noticable once the cc plate is on. An 1/8" of an inch on top of 24" of strut will adjust alot.

But if you're going 5.0, good luck ! That's a beast of an engine.

yeah, I'm just not sure if I'm going to hold onto the car or sell it and I know how people can be about modified cars (that have been cut on) plus I've had the lowering springs on for almost three weeks now and everything seems to be fine. No popping or funny noises and no noticeable uneven tire wear. so I think I should be fine without the CC plates. any lower then an
1 1/2 and I'd definitely be jumping on this deal.


thanks. I had an older guy that I work with ask me outta the blue about buying my car today to go along with his 427 cobra replica so if he's serious then a 5.0 may be in my future.

 

[crazyhorse]

bump... any offers?

 

[crazyhorse]

Still got them... any offers?

 

[stang03]

Still for sale? PM me lowest price! Looking to buy quick!