Stanced on Viper reps

[duggyb]

do you not think that wheels should get a treatment from some proper adapters just to be safe? or are they just fine as is.

http://cgi.ebay.com/ebaymotors/4-Bi...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

i know some guys have vibration issues running 114.3 on 115 but ive never seen it done the other way.

props on pioneering it though, looks unreal.

 

[devin2589]

do you not think that wheels should get a treatment from some proper adapters just to be safe? or are they just fine as is.

http://cgi.ebay.com/ebaymotors/4-Bi...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

i know some guys have vibration issues running 114.3 on 115 but ive never seen it done the other way.

props on pioneering it though, looks unreal.

no vibs at all. honestly the difference between the two is so minut and if by chance they didnt fit perfect then you could have the lug holes bored out slightly. the problem with adapters is that these wheels are already aggressive with an 18mm offset and you add atleast 16-25mm on top of that, the wheels would stick out way too far.

 

[duggyb]

no vibs at all. honestly the difference between the two is so minut and if by chance they didnt fit perfect then you could have the lug holes bored out slightly. the problem with adapters is that these wheels are already aggressive with an 18mm offset and you add atleast 16-25mm on top of that, the wheels would stick out way too far.

well this defiantly has me thinking, would love to see a car tucking rim on the 22x10 inch versions, i wonder if that's possible haha.

i may have to look into a set of these in satin black!

 

[devin2589]

well this defiantly has me thinking, would love to see a car tucking rim on the 22x10 inch versions, i wonder if that's possible haha.

i may have to look into a set of these in satin black!

i had the front tucking the rims but had about -3 degress of camber and rubbed at full lock. i would like the front lower but the back wont go any lower. i already took the 2 cuffs out of the rear coilovers

 

[devin2589]

you would also need to have about 3-5mm shaved off of the rear wheels to get them to tuck. or pull the fenders.

 

[duggyb]

i wonder if i did 22's with a slight pull and 2-4mm shaved if i could get rim about .5 inches from fender in the rear, and front just adjust as need be.

 

[Menes06GT]

wow those wheels are SICK, whats our suspension set up, thats slammed

 

[Wicked GT]

NICE!!!! Very original idea.

 

[LuckyH]

Those look good. I'm in spring hill as well lol.

 

[sprchrgd s197]

they have them in all back but the wheels loses a lot of definition. which is why i went with a machined face and black inside.

Oh, ok but they still are nice the way you have them.

 

[devin2589]

wow those wheels are SICK, whats our suspension set up, thats slammed

thanks guys. it's on H&R coil overs.

 

[peetiewonder]

pull those fenders!

 

[justinS197]

Dayum too bad your not closer i would love to get some rollin shots of that thing.............

At first i thought it was fake, but looks awesome! 19x13 is ridonkulous can you get a close up of the rear tire?

 

[joshfrisco]

Yea..

here are some better pics for you guys.

I like that..

stance

 

[devin2589]

pull those fenders!

Dayum too bad your not closer i would love to get some rollin shots of that thing.............

At first i thought it was fake, but looks awesome! 19x13 is ridonkulous can you get a close up of the rear tire?

i know man. fronts just need to be rolled and rears pulled slightly.

mine are 20x10 all the way around. i was saying the vipers run 18x10 and 19x13 staggered.

 

[Black3vGT]

Surprisingly they look really badass.

 

[duggyb]

i know man. fronts just need to be rolled and rears pulled slightly.

mine are 20x10 all the way around. i was saying the vipers run 18x10 and 19x13 staggered.

let me know how the rolling and pulling goes, i am scared to do this myself but i really want to at the same time.

i got a stance roller just sitting here looking at me! Saying DO IT!

 

[peetiewonder]

i think a slight pull in the rear would make those look tits.

 

[devin2589]

i think a slight pull in the rear would make those look tits.

I thought about doing that or going to a 235 tire and having more poke in the front

 

[28ONE]

Looks awesome!