**urgent**harness instal questions

[pieperz06]

well i just got my caribou racing seats and harness in and i have no idea how to install them and i have a race in the morning so i need some info on what exactly to do with what was given to me.

are thies bolts self tapping or some thing and i just bolt them in or do i need another bracket that i mount to the floor and then mount the harness to it

i want to try to get this done tonight so i can use them tomorrow at autocross

 

[psfracer]

On the lap belt--I just used the stock bolt location that the stock belts used. The belts going over your shoulder should just wrap around the bar that is behind your seat. The submarine belt I had to drill a hole and bolt through the floor.

 

[pieperz06]

On the lap belt--I just used the stock bolt location that the stock belts used. The belts going over your shoulder should just wrap around the bar that is behind your seat. The submarine belt I had to drill a hole and bolt through the floor.

how do i use the stock location when im not using the stock seats the lap belt is bolted to the stock seat and i have new seats also

 

[ocpony]

Use the same location of the stock seat belts. I was able to just unbolt the stock belt and then use the same bolt going thru the new harness connector and then thru the stock seat belt connector. The shoulder belts go to the harness bar/ roll bar. If no harness bar then you need the harness type that is long enough to reach to the floor. That might be a problem to bolt thru both harness conectors and the stock seat belt connector. If that is the case, leave out the stock seat belt connector.