Wiring harness to convert manual seat to power?

[Boss281]

I have a 2005 GT that originally came with a power drivers seat and manual passenger seat (these are airbag seats). After putting in Corbeaus for drag strip use, I wasn't thinking and sold the OEM seats. Now the car is pulled from track duty and I found two inexpensive leather seats from an '09 to replace the Corbeau seats. The passenger seat is powered as well and is stuck in the one position because the harnesses don't match on that side. Can I replace the wiring harness on the passenger side with a newer harness ('07+???) from Ford that has a power connector that would match the seat? I can't find a part number if this exists...

 

[o2sys]

I'm not sure about the 05, but on my 07 which only came with power driver seat I was able to convert the passenger side to power as well after purchasing a new seat and harness. Just also make sure to put a new fuse in the engine bay (it should be empty, 30amp fuse)

 

[Boss281]

I'm not sure about the 05, but on my 07 which only came with power driver seat I was able to convert the passenger side to power as well after purchasing a new seat and harness. Just also make sure to put a new fuse in the engine bay (it should be empty, 30amp fuse)

Did you get the new harness from Ford?

 

[o2sys]

Yes I did. I got from Steve at Tasca