WTB: Turbo kit for 05+ Mustang.

[PNR Welding]

Im looking to make alot of power and im looking for a complete turbo kit. Single or Twin. We were going to design a twin setup but I decided to hold off .
Thanks

 

[Jason]

http://s197forum.com/forum/showthread.php?t=27988

 

[PNR Welding]

http://s197forum.com/forum/showthread.php?t=27988

Hey nice kit. The only problem is the turbo is too small for me. I am looking for a 76mm or bigger. I am looking to make over 700whp. Thanks

 

[silverpoison]

talk to me Paul! I paid for my TT almost 8800, make me descent offer.

 

[Dex]

gzmo is selling his. Used to be mine. Made 721rwhp 824tq on C16 and 16lbs. 302 9:1

 

[PNR Welding]

gzmo is selling his. Used to be mine. Made 721rwhp 824tq on C16 and 16lbs. 302 9:1

His is nice, but the price is up there. I found a nice kit with a 76mm for about 1k cheaper. How much power can that turbo make?

 

[Dex]

His is nice, but the price is up there. I found a nice kit with a 76mm for about 1k cheaper. How much power can that turbo make?

I think that was about it. the MAF may have restricted it some along with the stock heads. I had a 76 on the same kit and it sucked. No fun on the street. the S366 turbo is really fun and sounds saawweeett

 

[uniquestang]

gzmo is selling his. Used to be mine. Made 721rwhp 824tq on C16 and 16lbs. 302 9:1

I think that was about it. the MAF may have restricted it some along with the stock heads.

not to thread jack but i been looking for people running high numbers on stock heads as i dont have money for heads just yet. free bump.

 

[PNR Welding]

I think that was about it. the MAF may have restricted it some along with the stock heads. I had a 76 on the same kit and it sucked. No fun on the street. the S366 turbo is really fun and sounds saawweeett

My car is about 80% track car and 20% street. Im more the less looking for a turbo that will allow me to run 9s all day long. Im not sure if this turbo will do that.

 

[ALLOY GT]

My car is about 80% track car and 20% street. Im more the less looking for a turbo that will allow me to run 9s all day long. Im not sure if this turbo will do that.

with that much torque im sure you wouldnt have a problem

 

[gzmo]

My kit with the turbo that it currently has is capable of holding up to 800whp. I just got off the phone with Wild Bill @ Bullseye Power and he said that the S366 is good for 800whp. As you can see, Dex and Alloy GT have had this same setup and it has put them over the 700whp with more hp to spare.

 

[PNR Welding]

Thanks guys, I just pulled the trigger and bought a hellion kit with a upgraded 76mm ball bearing turbonetics turbo and wastgate, and upgraded intercooler, complete kit including BBK shorty headers for 3900 to my door. I think I got a good deal for this. I am hoping to run 9s consistantly, run the 10.0 index this year,and drive it to and from shows and weekends for fun. I just need a good boost controller that I am looking for.

 

[SonicGT]

Thanks guys, I just pulled the trigger and bought a hellion kit with a upgraded 76mm ball bearing turbonetics turbo and wastgate, and upgraded intercooler, complete kit including BBK shorty headers for 3900 to my door. I think I got a good deal for this. I am hoping to run 9s consistantly, run the 10.0 index this year,and drive it to and from shows and weekends for fun. I just need a good boost controller that I am looking for.

silverpoison has one

 

[rford426]

Thanks guys, I just pulled the trigger and bought a hellion kit with a upgraded 76mm ball bearing turbonetics turbo and wastgate, and upgraded intercooler, complete kit including BBK shorty headers for 3900 to my door. I think I got a good deal for this. I am hoping to run 9s consistantly, run the 10.0 index this year,and drive it to and from shows and weekends for fun. I just need a good boost controller that I am looking for.

Were did you get all that for 3900?

 

[PNR Welding]

Were did you get all that for 3900?

http://forums.corral.net/forums/showthread.php?t=1199692

 

[PNR Welding]

http://forums.corral.net/forums/showthread.php?t=1199692

I got him to throw in a pair of headers shipping and paypal fees we negotiated to 3900. I figured I saved about 280.00 off of asking price. BBK shortys - 150. Paypal fees - 110. Shipping - 120.