Search results for query: *

We have started on my Foxbody now that my 05 is almost ready to go. We got a 3.5L EcoBoost from a 2015 F-150 with 12,000 miles on it and a 6R80 with 7,000 miles on it. We will be pulling the 306 push rod motor out the car after SEMA and bolting it all in. Then we are looking to tackle the wiring...

So some of you know what I went through to get the car going after blowing up the second built 3V. I have decided on a new setup and have just about everything in to get it going again.The car has been basically sitting for the last 6 years and a couple months (4/6/2010). I have gotten rid of...

QTY.1 - GT500 water pump - 7R3Z-8501-BB QTY.1 - GT500 WP gasket - F1VY-8507-A QTY.32 - GT500 Rocker Arms - 4G7Z-6564-AA QTY.2 - GT500 Intake Gasket - 9R3Z-9439-A Probably will have more to follow. Thanks

I will make an attempt to sell the engine complete down to ECU and wiring harness. If it doesn't sell with 2 weeks I will part it out. Prices below and all items are located in Houma, LA (45 minutes Southwest of New Orleans). All prices do not include shipping. Shipping cost will be what it...

I am looking to sell the longblock in my car. I am changing directions with it to get it up and going faster than progress is being made now. I am unsure what motor will be going in it but it will not be a 3V. Here are the specs on the motor. Modular Performance 326ci Big Bore 9.3:1 compression...

Already talking to Ken about getting a tune for this beast. It's actually pretty quick for stock.

I was wondering what the average building cost is on a new home in your area. We are looking to build and getting house plans finalized. The average cost around Louisiana is $75 a square foot per the internet but the average in Houma, LA is $105 a square foot.

under hood dimensions I am looking to build a road racing 2006 Mustang GT I bought recently. I need to know what the distance is between the strut towers and frame rails. Also does anyone know if Ford has a control pack for the ecoboost motor yet? I have searched but came up empty. I am...

Ordered a new front bumper and grill from him. Got a good price on it and it shipped today. Now to just get the painter to get some free time to paint it. Thanks again, BJ

So I just got my forward facing headers from CG Fabrication. These things are a work of art. The welds look amazing and are pretty reasonably priced. The headers are almost a mirror image from passenger to drivers side. They do not have a way to keep the A/C though and with some ingenuity you...

I have been looking at their rules and there in nothing about a Mod Motor. I have sent them an email to see where it would fit in to their classes as my car still weighs about 3250 lbs with out driver. I have some plans on what direction the turbo system is going but just not sure if 326 ci will...

Here is what I bought myself for Christmas. I picked it up last Tuesday before coming back offshore. I made about 20 laps on it and it is some fun stuff.

SOLD!!!!! THP Single Turbo Kit 2005-2010 Mustang GT...with extras SOLD!!!!!! to 05stang I'm from in Houma, LA 70360 and Turbo Kit is located in Baton Rouge at Total Performance Solutions...Willing to travel a short distance to deliver or meet. I am selling the turbo kit I was planning on...

http://www.libertysgears.com/clutchless.htm I have been looking at this transmission for a while and I am thinking about selling automatic. I may pull the trigger on one of these as I think it would be awesome to some what shift gears again. So my question is who has ever used one of them...

As most know I had a fuel pump problem on my LARRY_H built 302 stroker that caused some engine damage. Well I went with a Big Bore this time and she cranked up today after 18 months. Info on the motor: Modular Performance 326ci Big Bore Kellogg Crank Oliver Billet Rods Custom Diamond...

In this heap...Needless to say we couldn't find any races...Buddy got it last week as his birthday present...

I'm not sure if this was posted but this guy is making some advancements to take the 3V even further. It is a completely billet lower intake that will bolt up to a 3V but has the top machined to except any blower that will fit a GT500. I can see one of these in my future with a 3.6L KB or 4L...

Should be here is a few days along with their new home based training class to show you how to use it. Going to practice on my car with out the turbo and then my plan is to tune it myself when I put the turbo on.

So we ordered some Comp Cams for my buddies 2010 GT500 and we get everything installed. Trailer the car to the dyno and get it ready for some tuning. Then we find the car will not stay running from the transition from vacuum to boost. We dick around with this thinking it is a tune problem for a...

So we are getting close to tuning it and I have a couple questions.... Little back ground on motor Stock Crankshaft Billet Oliver Rods CP Pistons Ceramic Coated and side coated ( 9.3:1 CR ) 3.4L Whipple Crusher American Racing Headers and 3" exhaust 1. We have a 3.5" upper and 10% lower...

They are building a new World Class Road Course here locally and also have one of the best karting tracks being built in the country. I have only been into drag racing but now starting to branch out into some road racing. I know my Mustang will never run on the road course and I am looking to...

Here is a link I found while doing some snooping on The Turbo Forums http://www.theturboforums.com/smf/index.php?topic=128226.0 Do you think this is possible with the new Spanish Oak ECU as this one was done on a 2V. Seems like the main concern was getting the dwell time set correctly...

So I got a 326 ci Big Bore built and going through the motions of getting everything prepped to be put back together. Well I sent my Livernois St. 3 heads to a local machine shop to get a once over before installing them on the shortblock and I get a phone call saying 21 of my 24 valve guides...

Well I have been working here for a month and finally got some free time to go to a V8Supercar Race. I went to the L&H 500 at Phillip Island and it was awesome. I do not have a camera with me unfortunatley. The Ford Falcon entry runs a 5.0L with new design Coyote Heads on it. I talked to an...

So I searched and read over the 6-8 threads they have about the advantages and disadvantages of both but still not what I am looking for... I will be installing a Turbo here shortly and would like to do a different setup than most. I plan on putting a KB or Whipple Lower Intake with Air to...