Search results for query: *

My 2005 GT 5 speed was modified in 2006 for drag racing, and I raced it hard until about 2011, then wound down a bit and finally garaged it. Over time, many drag only parts (struts/shocks/antirollbars,etc) were replaced with street components to make it as comfortable and reliable as I can for...

I need to get a passenger seat sensor, the bladder with wiring harness. The one I picked up from an old seat seems defective. This will go in a Corbeau passenger seat, so I don't need the whole seat, just the bladder or Occupant Classification Sensor in Ford speak... See 501-20B-1 under...

My 2005 GT has a set of OEM 2006 seats in it that work fine. I sold the originals in 2006 to race the car, but I've been finding the parts and putting a full interior back in for street driving. All works now but... A set of stock seats pulled from a 2006 work fine in my 2005 Mustang GT...

This seemed like tech but it's so gray I just put it in chit chat. Way back in 2006, I "gutted" the 2005 for drag racing. My OEM seats had airbags but I bought terminators for the airbag plugs, moved the passenger bladder, and installed Corbeau seats. No airbag lights. A few years ago...

I live in a semi rural area of Carroll County MD (zip 21776). Based on the ridiculous prices for shipping at one of those UPS chains in shopping centers, I've pretty much given up on shipping and focused on local sales, but that isn't going anywhere. I have mufflers, x pipes, suspension parts...

2005 Mustang GT. Original car came with side airbags in seats. I'm very familiar with the thread on proper way to set up aftermarket seats and clear airbag codes when the OEM seat had the side airbags. Did the searches here and elsewhere. Long story short, started racing the car in 2006...

I did a little searching and found references to some folks (like me) that find the ride height in aftermarket seats like Corbeau a bit wanting and need a bit more height than the Corbeau seat bracket provides. I used to be 5' 10" but age has me down to just under 5' 9"! References to washers...

I sold my OEM "leatherette" seats WITH side airbags out of my 2005 Mustang GT in 2006 and replaced with Corbeaus for drag racing. Now that I'm putting the car back into street trim I'm searching junk yards online for an electric driver and manual passenger with airbags in gray or black. There...

I have a 2005 GT that originally came with a power drivers seat and manual passenger seat (these are airbag seats). After putting in Corbeaus for drag strip use, I wasn't thinking and sold the OEM seats. Now the car is pulled from track duty and I found two inexpensive leather seats from an '09...

Have a 2005 Mustang GT: cold air intake, intake manifold, comp 127500 cams and phase limiters, full exhaust with o/r h-pipe. Raced the car since 2006, been slowly putting suspension back to street. I've used custom tunes from 2 private tuners over the years, the first one was a significant...

2005 Mustang GT. Many mods. Across many Mustangs and many tuners, I've never had this happen. I hooked up my xcal to reload a tune to compensate for tire size, and before I could do anything the gauge cluster and obdII port went dead. Shit. Car cranked upfine though. Got the manual out...

I have the driveshaft for sale, and the guy buying wants to know if there are instructions somewhere (adapter plate, torque specs, etc). I certainly don't have them anymore, and the company appears to have gone out of business. Any ideas? Didn't see anything specific on this in the forum, nor...

After starting to put my 2005 back to street trim, I realized my original "leatherette" seats were sold long ago. The drivers seat was electric, the passenger manual, both leather in gray. They were the airbag variety. I found a pair of electric black leather seats out of a 2009 GT, which...

Hey guys I need some help. I keep my two Mustangs really clean and the paint in great shape, even with one an all weather driver and the other a weekend warrior. The Focus ST (my better half's daily driver) though has taken some hits through neglect of the finish. The bugs are ground in on...

The shifter linkage arm connects the bottom of the manual shifter arm to the transmission. Both nuts appear to be the same. Car I bought appears to have the two nuts stripped and half secured. Lots of slop. Local ford dealer no help (buy new replacement shifter), can't find these two nuts at...

Was toying with the idea of making one of the Mustangs (2005/2007) an automatic. Lots of threads here and elsewhere with parts lists for manual to 5r55, although I don't get sense of real cost (~I see estimates in the $5-6k range, although that's not clear if that's all new parts, used parts...

I just pulled my racing seats out of my 2005 Mustang GT, and installed 2009 power seats on both sides. The driver seat electric harness worked just fine (power and side airbag). The 2009 power passenger seat, however, has a different (wider and flatter) power plug, although the side air bag...

Still not seeing C&L products picked up by a buyer, so anyone know of a right sized filter for a C&L racer cold air intake for a 2005? Thanks...

What a turbulent couple of years! Anyhow, I've managed to hang on to my beloved 2005 GT, still one of the fastest NA 3Vs around. The drag suspension is out, BMR street suspension is in, and it just needs some sound deadening under the rear seat delete and trunk, some softer settings on the...

When my drag race seats were installed, the passenger side seatbelt connector (female side next to trans tunnel) was inadvertently set aside when the harness was set up. No one ever sat there so the chimes never came on and never noticed (I have the driver side factory seatbelt connected behind...

I am putting my 2005 back to street duty, as I'm done drag racing it. Suspension is back to corner carving, but the radio doesn't seem to be getting power. It's a Shaker 1000. The trunk amps and sub are long gone, sold, but the speakers are all in place still. I had some work done on the...

My 2005 started life as a street car for about a year, then I started racing it and removing lots of stuff to reduce weight. I have the original Shaker 1000 head unit and the car speakers, but took out the subwoofer and amps and sold them long ago. I'm now putting the drag car back to a...

I can't seem to find anything that doesn't leave a shiny oily gloss AND lasts. Currently, Meguires Endurance products have the longevity I like, but it's just too shiny. I just want a uniform solid black semi gloss or even a matte. Any thoughts...?

*SOLD* 2011 Diamond C 8x18 open dove tail trailer *SOLD* My car trailer is for sale. Turning drag car back to street so I don't need it any more. Used very little. Its a 2011 model with diamond plate deck and anti-sway. Great condition with with a few rust spots here and there, spare tire...

Dupe please delete Please delete this dupe, thanks