Decided the stock inlet crap had to go, purchased a 3.5 to 4 inch coupler, a 4 inch in diameter piece of stainless steel with a 45 degree bend in it and a MAF flange since I don't have anywhere to mount a blow thru setup with my aftercooler.
racepartsolutions.com for the MAF adapter, $25 plus shipping
www.siliconeintakes.com for the 3.5 to 4.0 elbow, $20 plus shipping
atpturbo.com for the pipe, $48 plus shipping
I paid $70 to have the MAF flange and a piece of pipe welded on-for the bypass valve hose-and bought a 4x9 S&B filter from JLT.
I had to trim the fan shroud to get everything to fit as well as a small piece of the radiator cover.
Total cost: Approx $240.
Pics:
racepartsolutions.com for the MAF adapter, $25 plus shipping
www.siliconeintakes.com for the 3.5 to 4.0 elbow, $20 plus shipping
atpturbo.com for the pipe, $48 plus shipping
I paid $70 to have the MAF flange and a piece of pipe welded on-for the bypass valve hose-and bought a 4x9 S&B filter from JLT.
I had to trim the fan shroud to get everything to fit as well as a small piece of the radiator cover.
Total cost: Approx $240.
Pics:
Last edited: