Vent Pod...

[1BADHRSE]

Does anyone know if they sell a 60mm Vent pod??

I am looking to put a Turbosmart Eboost2 in my driver side vent pod, just wondering if I would have to fab it up myself???

It does not look too difficult to make...

Thanks for the help!

 

[JeremyH]

Im looking into this as well i picked up a roush vent pod to try and modify to fit. Havent bought my eboost2 yet though lol.

 

[EagleStroker]

Just make your own, cheaper and you feel better about it

 

[1BADHRSE]

Ha I am trying to stop fabbing stuff... Wasting so much time that could be spent on intercooler piping lol!!!

 

[1BADHRSE]

Im looking into this as well i picked up a roush vent pod to try and modify to fit. Havent bought my eboost2 yet though lol.

how big of a difference is it... 8mm is alot right??? Is it possible shave it all around lol...

 

[JeremyH]

Its abouta third of inch in over all diameter larger so 4mm or 1/6 inch all the way around i will look at my pod when i get home tommorow and see how much room there is to widen. I might just cut the inside retaining plastic out and use 4 set screws drilled from the outside to center it in the pod so the vent can still put out air.

 

[1BADHRSE]

If you can get a picture up that be awesome... I am waiting to get my eboost, fedex says friday so when i get it I am goin to see how it sizes up...

 

[JeremyH]

Will do. will take some meaurements and pics for ya tommorow.

 

[1BADHRSE]

I greatly appreciate that...

 

[JeremyH]

Sorry man totaly forgot about this. Here are some pics.

The inside diameter is 51mm
and the ouside diamter is 2.8 inches or roughly 71mm so there is plenty of room to modify it to fit a 60mm eboost2.

 

[JeremyH]

Looking at it you would just need to cut out the inner ring and shave down the tabs slightly and it should fit in there nicely and maybe one or 2 set screws from the outside to make sure it doesnt move thats what i plan to do

 

[1BADHRSE]

Thanks for the pictures man!!!

Hmm I think I would be more cost effective just to make my own being as I would have to shave so much off the roush vent pod already...

 

[JeremyH]

The outside ring still has the mounting tabs to mount it right into the vent. And these pods go for $25. That way the pod is out and easy to work on and fit the eb2 bc in and then just pop it in the car, thats my plan.

 

[one eyed willy]

Sorry man totaly forgot about this. Here are some pics.

The inside diameter is 51mm
and the ouside diamter is 2.8 inches or roughly 71mm so there is plenty of room to modify it to fit a 60mm eboost2.

you got any power strips i could borrow?

 

[rford426]

Hahah I was looking at those too!!!^^

 

[JeremyH]

haha yeap i think i got one around here somewhere

 

[1BADHRSE]

I have a feeling this isnt going to work.....

I dont thing the chrome bezel will fit... When I swap in my new radiator I will try but it doesn't look promising...

ughhh...

 

[JeremyH]

Looks like the faceplate on eb2 is wider. It looks like it will fit but is gonna be close. If you look here there is gap still.
http://www.themustangnews.com/tech_08/st-0208_roush226.htm

Measure the inside diameter of the bezel in the car and then the diamter of the eb2 faceplate.

 

[1BADHRSE]

Well I got it in there.... you have to put the chrome bezel on first...

I have pictures...

 

[1BADHRSE]

Right now it does not look like what i thought it would... hopefully it looks alright in the car... There is "no air" getting through this....