Complete car part out! Everything must go!

[1BADHRSE]

Totaled my car the other day so I am completely parting it out. Everything must go. Engine bay is fine just damage done to the driverside fender and a destroyed ass end.

I can send pictures privately. I do not want to post any online.

Motor has less then 400 miles on it and is fully built: $8k for the complete running motor just have to figure out shipping.
Kellogg crank, celvite bearings, stainless rings, forged modmax rods, diamond 20cc pistons, 8.5:1 cr with arp bolts studs everything, canton pan, melling high flow oil pump, electric water pump, ati super damper balancer, milled heads with comp, turbo cams, comp limiters, comp springs.

Custom Twin Turbo Kit GT2860rs: $4,000 Shipped OBO

Tell me what you want. Drock had Dibs on the strut tower brace right now.

Slightly Polished Gt500 TB and adapter:$250 shipped

$150 each for this assembly ^

2 Step/ WotBox: SOLD

Jegs Plug Gapper: $20

SCT X3 unlocked:SOLD

Twin 405 Walboros in a Gt500 Hat: SOLD

Eboost2 with all needed hardware: SOLD

SOS Switch panel 05-10 mustang (line Lock/Guages lettering) : $60

Black stock Mustang Mats: $50 obo

Drake fuel rails with all fittings stainless braided and adapter fittings for stock system: $250

Brand New Mishimoto Radiator with 2 12'' fans and custom bracket: $300


Guys do me a favor just let me know what you want my build thread shows all the work and dedication http://www.s197forum.com/forum/showthread.php?t=27381&page=22

EVERYTHING IS FOR SALE... No Low balling please this is already tough enough for me this was my life. Now i need to move on.

 

[Joser281]

Damn man, sorry for your loss man... GLWS

 

[jmauld]

That's a nice looking engine.

How much for the license plate?

 

[black06gt3v]

how much for the water pump

 

[1BADHRSE]

That's a nice looking engine.

How much for the license plate?

Thanks guys, engine is brand new looking for a good home. Built for 1000+

I will prob hold onto the plates in all honesty.

 

[JoshK]

Very interested in the eboost. Gotta see what the paycheck is going to be though(sucks being broke)

 

[95five-0]

What kind of transmission was in the car

 

[1BADHRSE]

Very interested in the eboost. Gotta see what the paycheck is going to be though(sucks being broke)

I hear you man just let me know. Hoping the insurance cash and parts gives me enough for my new car.

What kind of transmission was in the car

Rebuilt 3650 with a hardened 26 spline.

 

[Memphis 05]

sorry for the lost.....


how much for the 2 12" fan set up... if you will seperate, if not then i understand...

what front suspension parts do you have?

 

[sportinawoody]

rather than part it , why dont you buy a rear clip off my buddy and fix it ?

 

[calispecial08]

Did I miss the price on the engine?

 

[08 Vapor]

Holy shit, after all that work the car is totaled? That's crazy. How severe is the frame damage? Even if you get a salvage title, the sweat equity you have in the thing at this point is worth it. I'm doing CS front and rear bumpers on my car. You're welcome to the stock GT front and rear bumpers for nothing. If it helps you get the car back on the road I don't mind. Prob a long shot, just figured I'd throw it out there. Sorry for the accident, man.


If you're set on parting out though, I'd be interested in any carbon fiber or interior pieces you have to help you recuperate some money.

 

[1BADHRSE]

I really don't want pictures of the love of my life floating around online in any fail photos or anything so i am very reluctant to share. Car is totaled this wheel was ripped off and found under the car by the driver seat. Hit 3 trees rear end is pushes completely in from the driver side.

Motor price is really hard to determine cause on just labour and parts I'm at close to 10k. I would like to sell it complete pan to heads. Block was bored 20 over line honed and completely cleaned. Heads were cleaned milled and slightly ported. Motor was built for boost, I was going to push my turbos till they couldn't take it. Cams are custom grind for boost with comp springs, steel retainers and limiters.

If you read my build thread nothing was cheaped out on.

9k shipped for the complete motor. obo

 

[RIDDLER]

Pm'd you on some parts.

Sent from my PC36100 using Tapatalk 2

 

[evostang]

Pmd on parts

 

[09CandyredGT]

PM on motor

 

[leviathon]

real sorry for your loss bro, im not sure anything you have i can use for a v6 but any brake stuff let me know ill take a look if helps you

 

[Chino]

Springs available?

 

[WOT]

Driver side power seat track please PM price, Thanks.

 

[LAStang1234]

How much for the strut brace? Can put me behind Drock if he ends up not getting it.