Finally, the new build!

[Greg Hazlett]

Seriously?

Yep....wrench light...fucking TB......

 

[Greg Hazlett]

You getting new rods and pistons?

He has a built bottom end already-minus the stock crank.

 

[LAllison20]

Still have your stocker? If mike would get my tune update to me I could loan you the bbk, wait...nope that aint gonna work. What is up with the throttlebody???

 

[Greg Hazlett]

Wrench light=limp mode=no revs over 2K....sigh....he thinks the TPS motor is bad so I sent him a spare I had.

 

[JeremyH]

your due for some new vids!

Got to get it running first lol

 

[LAllison20]

Wrench light=limp mode=no revs over 2K....sigh....he thinks the TPS motor is bad so I sent him a spare I had.

Was the TPS motor from your 2010 stock TB?

 

[JeremyH]

Some pics of parts stuffed in the car waiting to go on!

 

[Greg Hazlett]

LOL...looks like we have a lot of work ahead of us!

 

[LAllison20]

I see alot of Greg's worst enemy, header wrap....

 

[JeremyH]

Yup!

Started on the return water line/fitting from the turbo to upper hose.

 

[JeremyH]

I see alot of Greg's worst enemy, header wrap....

LOL Yup, got one more pipe to wrap that im doing tonight, piping is all ceramic coated as welll.

 

[Greg Hazlett]

Yuck...I am scratching already!!!

 

[S197gt07]

Looks sweet!

 

[Doug M]

Very sweet!

 

[JoshK]

Is that all you got done today?! Intake looks badass Jeremy

 

[JeremyH]

Finished figuring out where and how to mount my Fore billet vac/boost block. Think it turned out pretty nice! Used two L brackets to mount it to the cowl area, still have to go back and drill holes and bolt it in but its mocked up for now. Ran a 8an hose right from the back of the manifold to the 3/8 barb on the left and then the 3/8 barb on the right goes to the brake booster. The 3 middle 1/4 barbs are for the frps, bov, and boost gauge/eboost2. Then I plugged the 2 other holes on the block.

It was getting dark but here are some pics for now, will take some more when all the hoses are routed and its bolted in. This piece is nice! And best part, no more snake pit of vac hoses and t fittings up there!

 

[JeremyH]

Is that all you got done today?! Intake looks badass Jeremy

You spoke too soon, look above lol

Also spent a good amount of time wrapping the new piping and doing little things like making brackets and painting them black, putting the compression fittings on the an hose for my water lines, yadda yadda. lol


Yeah the intake came out great and I picked something I pciked a graphic I hadnt see anyoen do before. It would look badass in red or blue as well.

 

[one eyed willy]

Yuck...I am scratching already!!!

It don't get all over you if you let it soak in a bucket of water while your wrapping it! Plus allows it to wrap soooo much easier!


Looking good Jeremy!

 

[W3bb3r04]

Hey Jeremy, are those the header wrap specific quick stainless ties? Still trying to decide what to use on mine

 

[JeremyH]

It don't get all over you if you let it soak in a bucket of water while your wrapping it! Plus allows it to wrap soooo much easier!
Looking good Jeremy!

Thanks! Have you heard anything good about this header wrap spray, it s a silicone spray rated to 1500 degrees that you can use to seal and protect the wrap after its on. Thought about trying it out.

http://www.ebay.com/itm/DEI-HT-Sili...Parts_Accessories&vxp=mtr&hash=item2c680dc29a

Hey Jeremy, are those the header wrap specific quick stainless ties? Still trying to decide what to use on mine

Yeah they are stainless steel zipties, most places that sell wrap have them but you can also get them at Lowes or Home Depot.