o ring help / part number

[cwhit23]

I need the o rings that go on the block where where the heater hoses connect. The are behind the valley and under the intake. There is two o rings about dime size. I went to my local Ford dealer and they couldn't find the part- these are the inlets dead center behind the water pump.. it's on an 06 mustang GT.

Thats the best way I can describe it, if pics are needed I can't get them until tommorrow. I appreciate any help .. even if anyone knows if I can just buy a pack of o rings and it'll work. I forgot to take those off before sending the block to the machine shop and when it got dipped it messed them up.

 

[19COBRA93]

I need the o rings that go on the block where where the heater hoses connect. The are behind the valley and under the intake. There is two o rings about dime size. I went to my local Ford dealer and they couldn't find the part- these are the inlets dead center behind the water pump.. it's on an 06 mustang GT.

Thats the best way I can describe it, if pics are needed I can't get them until tommorrow. I appreciate any help .. even if anyone knows if I can just buy a pack of o rings and it'll work. I forgot to take those off before sending the block to the machine shop and when it got dipped it messed them up.

The part number on those orings is: W704593-S100. They're kind of expensive, but those are what you're after.

 

[cwhit23]

The part number on those orings is: W704593-S100. They're kind of expensive, but those are what you're after.

Thanks a ton man! I have had the hardest time trying to find those. The guy at Ford said he couldn't find they even existed.. I was like nope, they exist.. lol Thanks again!

 

[19COBRA93]

Thanks a ton man! I have had the hardest time trying to find those. The guy at Ford said he couldn't find they even existed.. I was like nope, they exist.. lol Thanks again!

It shows them in the pic with the bare block, but not with the cooling.

 

[one eyed willy]

Rock auto part number 72014 $.31 each.

 

[cwhit23]

It shows them in the pic with the bare block, but not with the cooling.

well, that makes sense. We were looking at the cooling/heating schematics and couldn't find them. Thanks again, I was stressing over two little o rings.. My motor is going in this Saturday so I'm on a scramble to gather up any missing parts and loose ends, so I can finish putting what I can together on the stand and hopefully get this back in the car so I can move on to the fuel set up and blower.

 

[AutoXRacer]

You could have also bought the heat hose connector and just taken the o-rings off.
I had to buy one and the connect/fitting was only $10 or so.

But Willy's way is cheaper... lol

 

[one eyed willy]

Ordered mine 2 days ago from rock auto and got them today.