Need Moar Low. Sportlines or H&R Super Sports?

Pardue

Senior Member
Joined
Nov 7, 2011
Posts
1,599
Reaction score
1
Location
Lula, GA
I'll gladly sell this and buy HR SS if they are lower and just eat the difference in $$.

From what I can gather, the manufacturer claims are that the HR springs are .1" lower in front and the Sportlines are .1" lower in back.
Not sure about 05-09 cars but I believe the H&R supersports are lower front and rear than the sportlines for the 11-14 cars.
 

Grimlock

Member
Joined
Nov 24, 2014
Posts
69
Reaction score
0
Location
North Alabama
I have and my car is noticeably lower than my buddies '14 on sportlines.

Damn, you were sitting on the trigger with that quick reply.

Just looked on LMR and it seems like HR used two different springs for our cars.

05-10 HR SS (#HR-5165577) 1.7" / 1.9"
11-14 HR SS (#HR-5169077) 1.7" / 2.4"

Comparing those to the 05-10 Sportlines that claims between 1.6" and 2.0" drop.
 
Last edited:

bujeezus

Senior Member
Joined
Aug 31, 2015
Posts
3,273
Reaction score
374
Location
Alabama
I've got a frankenstein setup currently. Originally I bought SR springs for a 1.5" drop all around. Still too high in the rear so I picked up a pair of rear Sportlines from a forum member here. Leveled it out pretty much, maybe just a hair taller in the front. Finally said fuck it and bought a set of the H&R Super Sports today so will post up results when I get em installed.
 

Grimlock

Member
Joined
Nov 24, 2014
Posts
69
Reaction score
0
Location
North Alabama
I've got a frankenstein setup currently. Originally I bought SR springs for a 1.5" drop all around. Still too high in the rear so I picked up a pair of rear Sportlines from a forum member here. Leveled it out pretty much, maybe just a hair taller in the front. Finally said fuck it and bought a set of the H&R Super Sports today so will post up results when I get em installed.

Please do. If you can, take some measurements in the back with the sportlines and HRs.

EDIT: Noticed your location. Wouldn't happen to be in North Alabama?
 

Pardue

Senior Member
Joined
Nov 7, 2011
Posts
1,599
Reaction score
1
Location
Lula, GA
Damn, you were sitting on the trigger with that quick reply.

Just looked on LMR and it seems like HR used two different springs for our cars.

05-10 HR SS (#HR-5165577) 1.7" / 1.9"
11-14 HR SS (#HR-5169077) 1.7" / 2.4"

Comparing those to the 05-10 Sportlines that claims between 1.6" and 2.0" drop.
I saw that too. My experience is only with 11-14 cars.
 

bujeezus

Senior Member
Joined
Aug 31, 2015
Posts
3,273
Reaction score
374
Location
Alabama
I been up there a couple times to see my brother an his family.
 

Grimlock

Member
Joined
Nov 24, 2014
Posts
69
Reaction score
0
Location
North Alabama
As noted earlier in the thread, the HR SS springs are actually two different springs for the 05-09 and 10-14 cars where the 11-14 is considerably lower. Is there anything stopping me from fitting the new ones on my 08?
 

o2sys

Senior Member
Joined
Jun 26, 2011
Posts
4,367
Reaction score
21
Location
NY/NJ
Need Moar Low. Sportlines or H&R Super Sports?

You will need 11-14 strut mounts for the front IIRC.

Unless the springs are all the same and was only the actual struts that were slightly different.
 

bujeezus

Senior Member
Joined
Aug 31, 2015
Posts
3,273
Reaction score
374
Location
Alabama
Hey Grim, sorry I've been draggin my ass on the rear springs. I plan on gettin em on there tomorrow (maybe this evening).
 

TGR96

el blanco nino
Joined
Feb 15, 2011
Posts
10,353
Reaction score
26
Location
Huntsville, AL
Gotcha. I routinely see a Bullitt driving around Huntsville and thought it may be you.

Hey man, I just noticed you are in Huntsville. Ever go to any car shows/cruise ins? I am a regular at the First Wednesday meet at Providence. You should definitely come out next month if you have never been.

There is currently a pic of my car at last month's First Wednesday meet on their Facebook page:

https://www.facebook.com/firstwednesdaycarmeet

And as far as your thread topic, I am on H&R SS springs, but I got the springs used, and I'm running 05-10 Tokico D-Specs with the GT500 mounts to fit my '13.
 
Last edited:

bujeezus

Senior Member
Joined
Aug 31, 2015
Posts
3,273
Reaction score
374
Location
Alabama
1g42LwC.jpg


Eibach Sportlines rear, SR Performance fronts

PWsy51L.jpg


H&R Super Sports front and rear

I0CkJr4.jpg


Close up Eibachs (rear)

el661nC.jpg


H&R rear close up

KdeIi5W.jpg


SR front

bQcXtrN.jpg


H&R front
 

bujeezus

Senior Member
Joined
Aug 31, 2015
Posts
3,273
Reaction score
374
Location
Alabama
Sorry for the weird resolution on the close up picks. I don't know why Imjur doesn't like portrait pics. For some dumbass reason, I didn't measure the previous height where that pic was taken. I did measure them at the parkin lot at work, so I'll have to wait til Monday to get you the actual new measurements. The H&Rs about 3/8" lower all around than the old setup, maybe just a hair more than 3/8" in the front.
 

Grimlock

Member
Joined
Nov 24, 2014
Posts
69
Reaction score
0
Location
North Alabama
Really interesting that the rears are lower. I can believe the front since HR claims a larger drop but the narrative online suggests the sportlines are the lowest you can go in the rear. Regardless, those pictures suggest otherwise.
 

Grimlock

Member
Joined
Nov 24, 2014
Posts
69
Reaction score
0
Location
North Alabama
I'm guessing the HR springs have settled a bit since this weekend. Did you ever find those original measurements?
 

bujeezus

Senior Member
Joined
Aug 31, 2015
Posts
3,273
Reaction score
374
Location
Alabama
These are the measurements from the ground to the fender.

front 26.5"

rear 26.75"

So the H&Rs dropped it another 1/2" in the front and 1/4" in the rear.
 

Grimlock

Member
Joined
Nov 24, 2014
Posts
69
Reaction score
0
Location
North Alabama
That is pretty damn low. With the sportlines, I was planning on running 275/40/19 tires which come in at 27.66". Combine them with the Drift's +35mm offset and I think I'd be rubbing the fender. The good news is that the 285/35/19 (26.85") should fit perfectly with the HR springs.
 

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top