Installing Vortech in the morning

[tigerhonaker]

I finally got the extractor/broken stud out! I might do a write up on it once I am done installing this thing, now just waiting on the UPS man to show up with my replacements. Might go ahead and extend the MAF and I still need to do the BAP.

Good to read that one part of this has been taken care of.

I know you are glad that is now done and over with.

Maybe you can get on with the fun stuff now on the install.

Things are looking up !!!!!!!!

 

[95ragtop]

So I started extending the MAF and am about half done. UPS still no esta aqui and its 8:30! I paid for overnight shipping! FML

 

[tigerhonaker]

So I started extending the MAF and am about half done. UPS still no esta aqui and its 8:30! I paid for overnight shipping! FML

Well, at least meanwhile you are getting things done.

Hang in there Pal.

 

[95ragtop]

So I learned that when ordering something overnight on a Friday doesn't mean it will arrive on Saturday, it means Monday. So MAF is extended and BAP is installed, let's see if I can finish it tonight.

 

[tigerhonaker]

So I learned that when ordering something overnight on a Friday doesn't mean it will arrive on Saturday, it means Monday. So MAF is extended and BAP is installed, let's see if I can finish it tonight.

I should have read your Post closer when you ordered.

Business is Saturday UPS Delivery.

Residential is Monday.

So tonight you are back in Business.......

 

[navyman8903]

Hopefully you get everything buttoned up and started no problems.

 

[95ragtop]

Well parts came in late yesterday, so I finished buttoning up everything this morning. The very last thing I was concerned about was the PCV system because I bought mine used and didnt include pieces to change the driver's side, so I used the search button and decided to use breathers for both sides. The only hard thing to find was the 5/8 vacuum cap for the drivers side, which I had to go to Lowes to find (check floor protectors). The extra 150 horses can be found about 4K+ and just cruising around it feels stock except for hearing the Bosch by pass valve. Pics will follow.

 

[tigerhonaker]

Well parts came in late yesterday, so I finished buttoning up everything this morning. The very last thing I was concerned about was the PCV system because I bought mine used and didnt include pieces to change the driver's side, so I used the search button and decided to use breathers for both sides. The only hard thing to find was the 5/8 vacuum cap for the drivers side, which I had to go to Lowes to find (check floor protectors). The extra 150 horses can be found about 4K+ and just cruising around it feels stock except for hearing the Bosch by pass valve. Pics will follow.

Glad it All is over and it All worked out fine in the End !!!!!!!!