Search results for query: *

  1. Jerry Stoneking

    4.6 3V engine rebuild plan version 28

    This is my current plan after bouncing around several times. Around December, Kelly Machine in Phoenix will re-build my engine using my Comp Cams 127200;s, high volume Melling oil pump, and my Ford brand cam phasers and VVT's. Everything else will be new provided by him; w/ +.020 stock...
  2. Jerry Stoneking

    Has anybody done this? Machine shop rebuild and thro in a Comp Cams 127200 and Mahle 10.9:1 pistons (on a 5 speed and 4:10's).

    I want to keep the budget on the low, so I would like to hear from somebody that has done this 'set-up' and what the results where. I will use Kelly's Machine Shop in Phoenix to rebuild my 4.6 3V (they know the ins and outs of this engine), and BTW thro in my Comp Cams 127200's, my Mahle 10.9:1...
  3. Jerry Stoneking

    To rebuild a 4.6 3V, or buy an 07-09 GT500. I really want a GT500; I hope it's a good idea. LMK!

    I have a 2005 GT vert that I love. All the bolt on's, Long tubes, Exedy stage 1 clutch, 4:10;s. I have 10.9:1 pistons, and 127200 cams for the build. But I know think I want an 07-09 GT500. I need some advice on this; is it a good idea. Thanks, Jerry
  4. Jerry Stoneking

    Who still sells 11:1 pistons for the 4.6L 3V. The best I can find is 10.36:1.

    The only pistons I can find are for he 5.4L 3V, and the 4.6L 2 and 4 valve. Anybody know which .030 over piston can do 11:1?
  5. Jerry Stoneking

    Connecting rods that are 5.933 stock, and 5.950 stroker rods.

    I need to order connecting rods and pistons other than stock. I am not finding much info on this; can anybody give me the low down. I see connecting rods that are 5.933 stock, and 5.950 stroker rods. Can these rods be used with a stock crank, and stock configuration piston? And what do you...
  6. Jerry Stoneking

    Installed Accel SuperCoil on car, now it barely runs, even with the original coils on the car.

    I have a 2008 GT that ran great. I replaced 1 coil pack (#1 cylinder) with an Accel SuperCoil for a test fit. I drove about a block and the car starting running terrible. I came right back home and put the old coil back on, but the car still idles like crap. My OBDII tool says mis-fire on all...
  7. Jerry Stoneking

    Need help choosing between Comp cams 127200 and Detroit Rockers.

    Detroit Rocker Naturally VS Comp Cam 127200. Anybody have some good info when I comes to pick one of the two. I have a JLT cold air intake, JBA long tubes, catless, Exedy Stage 1 clutch, 4:10 gears. I want the most power and torque, sound is not as important, I don't want to change springs...
  8. Jerry Stoneking

    Who's figured out the MSD 2 step for a hard launch?

    I just installed the MSD 2-step on a 2005 GT with all the bolt-ons, Tremec 5 speed, Exedy stage 2 clutch, and 4:10's in the back. I am using a push button momentary switch, and I working on getting a hard launch. Anybody have some good tips on this for RPM and technique?
  9. Jerry Stoneking

    Is there a known HP to be gained with exhaust cut outs?

    I cannot find any good info this. I saw one YouTube post that said 60hp gain, but the car had cams (which I don't have), and nothing else. I have maxed out on bolt on's, and I have a Lito tune, Exedy Stage 1 clutch, and 4:10's (not interested in the cams; the selling point seems to be sound...
  10. Jerry Stoneking

    2005 Mustang MSD8913 Dis-Tach Driver. Anybody have one working?

    I have a 2005 Mustang with an MSD 8913 Dis-Tach Driver spliced into the #8 coil positive wire, and not getting a signal. Sooo, either I am doing something wrong (most likely), or the MSD Dis-Tach does not work. Need help.
  11. Jerry Stoneking

    Aftermarkert tachometer and placement.

    What are you using for your aftermarket tach and placement? Anybody using the a-pillar type with a convertible?

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top