Search results for query: *

  • Users: bmaxwell
  • Content: Threads
  • Order by date
  1. bmaxwell

    2006 GT MMR 600 Motor and More

    2006 Mustang GT w/ MMR 600 Motor and More For sale before you is a 2006 GT Mustang 5spd manual. This Mustang has just under 85,000 miles but this car has a built shortblock, and a newer stock 5 speed transmission along with quite a few other parts I will go over after I explain a few other...
  2. bmaxwell

    SCT Xcal3/SF3 unlocked/unmarried

    Just as the title says I have a SCT Xcal3/SF3 programmer for sale. $250 plus shipping is what it will cost you to obtain this bad boy. There is no damage whatsoever to the programmer. Thanks
  3. bmaxwell

    Saleen 6.5 Blower Kit $1,600

    Saleen 6.5 Blower Kit $1,650 Sorry for the typo in the title, the price is $1,650 plus shipping. I'm parting ways with my Saleen series 6.5 supercharger off my 06 GT Mustang as well as the car itself. The reason I am selling it for so cheap is because I am 99% sure the blower needs a...
  4. bmaxwell

    WTB Alternator Bracket for 06 3V

    If anybody has this item I would greatly appreciate it if I could ever so kindly take it off your hands. I have discovered that it has to be either 05 or 06. Thanks a ton gentlemen
  5. bmaxwell

    06 Alternator

    Does anybody know if an 07+ alternator bracket is different than an 06? I know the coolant crossovers are different
  6. bmaxwell

    WTB Stock 06 3v Alt Bracket & Alt Pulley

    Hey bros I need the stock alternator pulley and alternator bracket if anyone has them and wants to part ways with it for a fair price. I'm sure the parts are the same on all 3v cars but mine is an 06 if it matters. Thanks!
  7. bmaxwell

    3v Techco CAI and Catch Can

    The Techco CAI has a 100mm housing I believe. I used it on my saleen blown 3v and made 500rwhp with stock maf and it never pegged, so I know this bad boy is good enough for much more. I don't think they even make these anymore but this sure is a sweet intake and was expensive as piss! The...
  8. bmaxwell

    EV6 Siemens 60lb Injectors High Impedance

    Selling my EV6 60lb injectors off my 3v that have been used for approx 15k miles. No problems with them whatsoever. $250 shipped Part number 108191 is what I'm trying to show here
  9. bmaxwell

    Boss 302 Manifold

    I'm selling my Boss 302 mani that has been on my 5.0 for 4k miles and I have everything needed to make this work, so a few caps to cap off a vacuum hose mouth, a hose with clamps, and the intake elbow to use with your stock air box. With a 93 octane tune and this mani alone, not even a cai...
  10. bmaxwell

    Stock 3V Throttle Body w/ Electronics & GT500 Throttle Body w/ Adapter

    Stock 3V Throttle Body w/ Electronics I'll let the stock 3v throttle body go for $75 shipped and I eat PayPal fees. Comes with working electronics.
  11. bmaxwell

    WTB 05-09 Stock Intake w/ Stock Plates & Stock Injectors

    I am looking to purchase a stock intake manifold with the stock charge motion plates unfucked with as well as stock injectors for 05-09 3v. I'm not in a big hurry so if you're trying to get rich don't even bother please. Lemme know what you have, thanks!
  12. bmaxwell

    2011+ Pypes Pype Bomb Axle Backs

    SOLD I've had these axle backs for roughly 11k miles now and I like them alot but want to change it up for something else I like more. There's not a scratch on them they're only just a tad bit dirty. I'm asking $210 shipped. They'll be on my car until they are purchased. You need to use...
  13. bmaxwell

    13' GT fog lights modified to fit into 11-12 stock grille

    So, I bought some of the 2013 GT LED fogs and figured out a way to make them fit on my 2011 5.0. In order to do that I had to hack away about an inch of the heat sinks on the back of the light, hack off one of the three mounting tab holes that the screw goes into, flip the light upside down...
  14. bmaxwell

    05+ stock length 47lb FRPP injectors

    I have a set of 47lb FRPP injectors I used to run E85 on my NA 2011 5.0. I traded the vehicle in for a 2013 and also moved away from the E85 pump so I have no need for them. I wanted Johnson Lund to tune my car and for an E85 tune on the 5.0s he requires that you have bigger injectors over...
  15. bmaxwell

    WTB Longtube Headers and O/R X for 2011GT

    I am looking for longtube headers and O/R X for my 2011 GT. I will probably end up using the forum discount on AM and get some off there, but if somebody has a pair with an O/R X they are wanting to get rid of for a reasonable price I am interested. I am not trying to go with Kooks or...
  16. bmaxwell

    LC-1 Wideband, Catch Can, and H&R SS lowering springs

    . LC-1 Innovate wideband with the DB Blue gauge. Bung. O2 sensor and all. 150$ shipped. . SOLD . My car with only the rear lowered with H&R SS springs. I have the full set but only put the back ones on and decided not to use them. I will snap pics of just the springs Thursday when I get...
  17. bmaxwell

    Oil Pressure Question... Smart Guys Please Read

    Ok so the factory oil pressure gauge on my 06 3v is intermittently bottoming out and immediately going right back up to normal pressure. It will do this after about a 15 minute or so drive and it will NEVER do it while on the gas, only when I stop at a redlight or whatever and the car is at...
  18. bmaxwell

    WTB PHYPES Boomtubes for 2011 GT

    As title states I need the phhhhypes boomtube axle backs for my 2011 GT. Thanks!
  19. bmaxwell

    Opinions?? 5.0 exhaust...

    C47ZkjB5Ga4 My car is about 1:22 seconds or so in. The other cars are hilarious hahaha. My fourth gear synchro is half ass out btw, pardon the slower shift. Exhaust=on3 3in off road x with magnaflow magnapacks mounted in place of resonators in the middle of the piping. I then got an...
  20. bmaxwell

    WTB 47lb Injectors for 5.0 Coyote

    WTB 47lb Injectors for 5.0 Coyote. Reasonable price. Thanks
  21. bmaxwell

    What the hell is this?

    So I just picked up this 2011 5.0 2 weeks ago and I have been wondering why my rims have this black shit on them. The guys at the dealership said it came to them that way and I washed the car obviously but it looks to me as if somebody tried their own little design or somehow it got dirty and...
  22. bmaxwell

    WTB 05'-09' stock front sway bar with end links

    Hey guys I am needing a stock front sway bar with the end links if possible for my 06 GT. I prefer local pickup from either Austin or Dallas. My pops is in Dallas and I'm in Austin. Thanks ghuys!
  23. bmaxwell

    Catch Can Setup For Saleen Supercharged Guys?

    So, I am only running breathers and oil is spewing outta the breather everywhere on the passenger side and I believe a little bit on the driver side. Most of the catch can setups I have seen are only setup on the driver side and leave the passenger side either with a breather or still...
  24. bmaxwell

    WTB Oil Separator Setup

    I am looking for a catch can setup since the breathers are spewing oil all over my engine. Doesn't really matter what brand, I just need something that works. Thanks guys
  25. bmaxwell

    WTB Ebrake Cable Assembly

    My ebrake cable snapped and as I understand, one has to buy the whole assembly?? Well I need one if so. Thanks guys.

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top