Search results for query: *

What do you guys think? 05 premium 5sp. 137k on the clock. Nice paint and guts. $4200.

Hey guys, I'm back after a 9 year hiatus from selling my 06 vista blue GT. Picked up a 2005 GT stick in mineral gray w black guts. Has mufflers and a cold air open box similar to what you'd see on an 08 Bullitt. I noticed a 91+ octane sticker on the gas cap leading me to believe it could have...

Not sure if anyone is a car salesman or familiar with the question that I am about to ask but thanks in advance for any help I may receive. If I were to trade my car in at a Ford dealer for a new ride would they accept it with the parts listed in my sig including no sway bars etc.? Would it be...

Thinking of selling my Bogart 15x10 w 275/50/15 Mickey Thompson ET Street DR's. They have a total of 200 street miles and 2 1/4 mile passes on them. They are mounted and balanced and I'm only looking for a local cash sale. I'm right outside Philadelphia so DE, NJ,MD I consider local and would...

Disappointing.....my sig shows my mods on stock 18's and tires running a 13.18 @105.91. Today I go with the addition of an aluminum driveshaft and Bogart rear wheels with Mickey T drag radial and my best run was a 13.241 @105.92 with a 2.141 60ft followed by a 13.251 @105.18 with a 2.061 60ft...

Never posted any pics of my car so here are a few. Nothing special, just a 06 GT with a little over 5k miles. Mods/times are in my sig and I also have pics of it with rear Bogart's one post down.

Bogart Welded R/T 15x10 w/ Mickey Thompson 275/50/15

Bogart didn't send me anything stating otherwise but will a normal mounting and balancing machine that my local mechanic has be safe to use with these wheels? I know some companies have "state of the art" mounting and balancing machines for real low pro tires etc. Will my mechanic who is aware...

Are jack stands sufficient to remove/install the D/S? I am wondering if it will be high enough up to remove and get in with leaving the mid pipe in. I have limited driveway space so I guess my question is will the will I be able to do the job as long as I can fit under there or does it have to...

I have a set of Bogart 15x10's coming to me. Will the NITTO 275/50/15 fit the 10 inch rim since I think NITTO runs the tires a bit smaller or would I be safer going with Mickey T's. I like Mickey's better but NITTO are about 30 bucks cheaper per tire and weigh 4lbs less per tire. Thanks Bob

If anyone is interested in selling a used set of Bogart 15x4 and 15x10 I am interested. I would buy Welded R/T, Bogart GT, or D10s. Thanks Bob

My mods and E/T are listed below. Here's where my mind is wondering....aluminum driveshaft w/18inch Mickey's on my factory wheels should get me there. Or should I be patient and save up for Bogart's then add the d/s and wheels at the same time for a solid weight reduction hopefully equal to a...

-5,000 miles, Vista Blue w/charcoal interior upgrate package, 18in polished Bullitt wheels, auto...excellent condition inside and out kept under a cover. I am the second owner. Located in Ridley Twp PA.(3-4 miles from Philadelphia Airport) -Performance upgrades: JLT cold air intake w/SCT X3...

I'm going to Cecil County Dragway tomorrow morning around 9am just seeing if anyone else would happen to be there.

Will Weld Draglite XP size 15x10 with a 5.5 backspacing work on my 06 GT? knowing that I might need to get the sway bar relocation kit. Thanks, Bob

I have the Bassani X pipe that you can change from catted to off road fairly easily. I am think of switch to off road tomorrow. The impression I am under is that by doing this a CEL light may come on and that I can shut off the rear O2 with my SCT tuner to solve the problem. I have no...

Hey guys I'm going back to the track in about a month. Last time I ran I got a 13.39 @104 in my 06 auto with catted x pipe, axle back, and JLT CAI/tune. Tomorrow I am installing a BMR radiator support/sway bar delete which is said to knock off 26.5 lbs. off the front and switching to the off...

JBA Axle Back- $100.00 plus shipping-SOLD! Factory air box and inlet tube w/K&N panel filter-$70.00 plus shipping Factory H-pipe-$70.00 plus shipping Factory axle back $50.00 plus shipping *All items have about 1500 miles max on them, the prices are low because I know shipping is a bitch plus I...

If anyone has a excellent condition vista blue trunk lid WITHOUT a spoiler or holes I am interested. Or the unlikely chance someone has no spoiler on a vista blue stang and wants to trade for a trunk with a spoiler thats always an option. Thanks Bob

I finally had enough of my JBA axle back not lining up and sitting properly. I ordered the Pypes mid muffler system after hearing only positive reviews on it. Anyone have it? Love it? hate it? Any comments from those with it would be appreciated, and I also heard that it is a little tight...

I ran my car today at Cecil County Dragway in MD. I was highly disappointed with car running low 14's all stock in November. However, after adding a SCT X3/JLT II CAI, Bassani X pipe w/cats and JBA axle back I managed a 13.474 @104.56 mph and my second and best run was a 13.391 @ 104.03. I...

Here's a pic of my 06 GT....auto, JLT CAI/SCT X3, Bassani X Pipe, JBA Axle back. I will have some new times posted with the recently added parts shortly.

I recently added a Bassani Xpipe W/cats to go along with my JBA axle back which was a nice improvement in sound, nothing too noticeable as far as power though. Where I did notice a great deal of power and performance was with a JLT CAI/SCT X3 Tuner combo tuned by Evolution Performance...I have...

1. Are all 4 axle back hangers the same? I ask because Pypes sells replacement stainless rear hangers making me wonder if my tail pipe alignment issues could be my fault by messing up hanger locations. 2. The Bassani X pipe that can be changed from off road to catted required o2 extensions...

I'm looking at the Bassani X Pipe where you can change from cats or off road. Not sure if I'm going to go with this one but I'm looking and my question is if anyone has a Bassani X pipe. The reason I ask is that some companies are saying that Bassani X pipes will only bolt to Bassani headers...