Search results for query: *

  1. T

    ABS/TCS/Advantrac problems

    I cannot turn off Advantrac in my 2010 GT premium. I press the brake pedal, hold down the button for 5-7 seconds and the 2 TCS lights pop up on my dash and the message "service advantrac" not the "advantrac disabled" message I used to get. Sometimes the instant I press and hold down the button...
  2. T

    Auto to Manual tune file

    Cool thanks. Hopefully he can help me.
  3. T

    Auto to Manual tune file

    So is it as simple as getting a stock tune file from a factory manual car of the same year and overwriting that into my car over the current tune file? If that makes sense. Or is it more complicated than that? Its getting awfully close to spring and all I need for my car now is the tune file for...
  4. T

    New tune after 5R55S to TR3650 swap

    Hey, sorry for the late reply, you still have the time to that that for me? I just talked with my tuner and he said even just a stock base tune file for a 2010 GT manual would work and he can just copy everything that isn't related to the engine over to my current tune. Or vice versa, copy over...
  5. T

    WTB 05-14 clutch pedal wiring harness

    I get a 404 not found error from that link.
  6. T

    WTB 05-14 clutch pedal wiring harness

    Looking for the wiring harness that connects to the grey C215 plug under the dash in very close proximity to the clutch pedal cruise deactivation switch. This wiring harness connects the C215 plug to the clutch pedal cruise deactivation switch and to the clutch pedal neutral safety switch. The...
  7. T

    WTB clutch pedal wire harness from manual s197 car

    I too am looking for this harness, does anyone have one I can buy or know of someplace/someone I can get one from?
  8. T

    Clutch pedal wiring harness for neutral safety switch

    Ok I talked with Ford and it seems that the wiring harness that I'm looking for is discontinued. Does anyone know if I can buy one used somewhere? Or maybe if someone has got one I can buy? I live in Manitoba, it's gonna be hard for me to find a wrecked manual car in the junkyards around here.
  9. T

    Clutch pedal wiring harness for neutral safety switch

    The 3rd pic didnt upload, HERE IS THE 3RD PICTURE.
  10. T

    Clutch pedal wiring harness for neutral safety switch

    Is there supposed to be a small wiring harness that will connect to the cruise deactivation switch and neutral safety switch that I am supposed to get/buy when I do a 5r55s to tr3650 swap? I have found only 1 plug that is not being used up under my dash that is in the vicinity of the red/black...
  11. T

    S197 rear axle lower control arm brackets bent?

    Update, using a Cresent wrench with a 3 foot pipe is working to bend the brackets back straight enough. I need to find another Cresent wrench though, already broke one of my bigger ones, but 1 mount is straight.
  12. T

    S197 rear axle lower control arm brackets bent?

    And yes, the drivers side is worse than the passenger side.
  13. T

    S197 rear axle lower control arm brackets bent?

    Ya I was thinking too of bolting the bent brackets on and using them to tweak the factory brackets. I think that may be my best bet. Idk if anyone else has pictures of some non-tweaked brackets, cause I sure as hell don't.
  14. T

    S197 rear axle lower control arm brackets bent?

    Ya, Im not really in the market for finding a new rear axle, Im in the middle of nowhere Canada, my best option is trying my best to straighten them. Just asking to see maybe if someone else managed to to the same thing as me and what they did.
  15. T

    S197 rear axle lower control arm brackets bent?

    Ya Im definitely not swapping the rear axle, Im gonna straight those brackets as best as possible. It doesnt need to be perfect, since I've got adjustable control arms I can measure and adjust to get my rear axle squared under the car.
  16. T

    S197 rear axle lower control arm brackets bent?

    Are the factory brackets that hold the rear lower control arms to each axle tube supposed to be straight and perpendicular to the axle tube? or are they supposed to be angled and not straight plate steal? I had a little mishap about a year ago where I was doing a rolling burnout in the rain...
  17. T

    Electrical help on 5r55s harness to Tr3650

    yup, that seems correct, I was thinking if I really wanted to I could've just left my shifter actuator plugged in with it just permanently in park, but I would have to tuck it up beside the transmission somewhere. But we've got thus figured out now so I don't need to. Thanks so much again. Now...
  18. T

    Electrical help on 5r55s harness to Tr3650

    For anyone else that is doing this on a 2010 auto wiring harness the 2 wires are gonna be dark blue & white/green & beige. They are the only 2 wires on that 6 pin side on the 12 pin connector.
  19. T

    Electrical help on 5r55s harness to Tr3650

    oh man this is exactly what I needed, thank you so much. I don't think I'm gonna worry about wiring up the neutral safety switch at the moment. The 3 older dodge work trucks all don't have this and I'm very used to always pushing in the clutch before starting. Again thank you so much, now I can...
  20. T

    Electrical help on 5r55s harness to Tr3650

    I'm trying all sorts of forums, most of them ate old threads that either no one seems to have a solid answer or has been dead for years.
  21. T

    Electrical help on 5r55s harness to Tr3650

    This one correct? If what those 11 pins out of the 16 you listed are correctly described it doesn't seem like they have anything to do with being able to start the car? It seems the actual 12 pin connector is the one that needs modification too to so the car can start. Thanks for the help on...
  22. T

    Electrical help on 5r55s harness to Tr3650

    I'd this the connector? If so which way do I count the terminals exactly? Looking at the terminal side with the clip on the left side, do I count top to bottom left to right? Or down each column of 6 left to right? The side of the connector with my 4 fingers is the side with the plastic clip...
  23. T

    Electrical help on 5r55s harness to Tr3650

    My understanding of this is that there are only 7 pins/wires that actually connect? I know for a fact my auto plug has 11 wires and they all connect to a terminal. The plug has the potential to have a 12th wire/terminal connection but its just an empty slot. I can post a picture or 3 of you want?
  24. T

    Electrical help on 5r55s harness to Tr3650

    I cleaned them pretty good with my oily fingers to rub off the dirt and I'm positive they are those colors.
  25. T

    Electrical help on 5r55s harness to Tr3650

    I'm not really getting any reply on multiple forums. I might just end up cutting the round 11 wire plug off, stripping the wires and just touching each one together one by one seeing which one allows me to start the car. To my knowledge the reason for cutting 2 of them and soldering them...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top