TheCrowdPlow
Member
- Joined
- Jul 15, 2021
- Posts
- 59
- Reaction score
- 2
2010 Gt swapping the 5r55s to a Tr3650 and keeping the auto harness. I was following the guide that Anthony05GT made on the Stangnet forum and I had to stop at the part where he was saying which colored wires to cut and solder. On the big round 12 wire plug that inserts into the transmission and has rubber o-rings. Anthony says cut and solder together the red/light blue and white/pink wires. Well my plug is 11 wires and doesnt have either the red/light blue wire or the white/pink wire.
The 11 wire colors if got are;
1 green/blue
1 green/white
1 blue/orange
1 purple/white
1 grey/yellow
These 5 are on 1 side of the plug
On the other side of the plug are these 6
1 blue/beige
1 green/white
1 grey/beige
1 grey/yellow
1 yellow/beige
1 green/beige
Anyone know which are the 2 I'm supposed to cut and solder together?
The 11 wire colors if got are;
1 green/blue
1 green/white
1 blue/orange
1 purple/white
1 grey/yellow
These 5 are on 1 side of the plug
On the other side of the plug are these 6
1 blue/beige
1 green/white
1 grey/beige
1 grey/yellow
1 yellow/beige
1 green/beige
Anyone know which are the 2 I'm supposed to cut and solder together?
Last edited: