Search results for query: *

  1. BearzGT

    18" with Bremo brakes

    Whatever you do, do not do business with Cruizin Concepts Wholesale. Search on here and on the net. That POS company is 100 miles of bad road!
  2. BearzGT

    My 2007 GT

    We live in Clarendon Hills. Plan on attending the season opener on May 30th. It's pretty close to home.
  3. BearzGT

    My 2007 GT

    Car looks good. Welcome to S197. I like the new wing. Good way to separate the look from the V6'ers.
  4. BearzGT

    Older Guy Clutch Info Needed

    With those power numbers you're going to be somewhat limited in choices. I went with the Exedy Mach 600 which is probably overkill since I'm at around 445 to the wheels. The feel is definitely firmer than stock but very streetable.
  5. BearzGT

    New Wheels

    Wheels look great. I was told the wait was long for those when I ordered mine so I went with the basic wheel package until I found what I wanted. Can't beat the Windveil Blue color!
  6. BearzGT

    Quick, probably stupid question about Headers

    Used new OEM Ford gaskets when I installed the Kooks long tubes in 2010. No issues since then.
  7. BearzGT

    My 2007 Mustang GT

    Nice lookin vert. Always a sad day when you have to put the ride in the stable for the cold time. Days start getin longer in three days!
  8. BearzGT

    Wheels, Wheels, Wheels

    Late Model Restoration all the way. Jerrod real helped me out over there. What ever you do, don't even think about giving Cruizin Concepts Wholesale a penny. They ass raped me out of $375.00 for a restocking charge after they cancelled my order. They're assholes. Do a Google search for...
  9. BearzGT

    Steeda strut mount question

    Put them in at the same time as the Tokico D-Specs and Steeda Ultra-Lite Springs. Never had any unusual noises in the front suspension. Good quality parts.
  10. BearzGT

    Shelby Alcoa wheels

    Car looks great!
  11. BearzGT

    Non-Foulers are Foul

    I have Kooks headers and a catted H-pipe. I have my rear O2's double stacked starting this spring. Pretty much babied it until I had it emission tested in the Chicago area. Drove it another 400 plus miles until last weekend. Wound it out to around 6K twice to check the theory that the double...
  12. BearzGT

    If you could start all over again with your Mustang ... what would you change?

    I regret ever attempting to purchase my wheels from the assholes at Cruizin Concepts Wholesale.
  13. BearzGT

    Kooks Headers not good?

    My Kooks with catted H have been on since July 2010 when I installed the blower. Used Stage 8 locking bolts. Never looked back.
  14. BearzGT

    Getting Kooks LT's Next Week.

    Installing headers as an exhaust sound enhancing option??? Are you doing the installation on your own?
  15. BearzGT

    Exedy Mach 600 Clutch

    I'm right at 445 to the wheels. I had Brenspeed install the whole kit with the new Exedy steel flywheel. The kit came with a new slave cylinder. It's overkill for my setup.
  16. BearzGT

    Exedy Mach 600 Clutch

    I had Brenspeed install a Mach 600 in October of 2010. Broke it in for about 750 miles. It does grab down low but once you get the feel of it, you can feather it pretty good into first. Once you're rolling, it drives like stock.
  17. BearzGT

    Upper control arm & mount install question

    I removed both bolts while supporting the tank with my small floor jack. Once I got everything back in and the driveshaft angle where I wanted it, I put a little green LocTite on the UCA threads so nothing would back out. I put cap bolts back in instead of the goofy torx T50IP plus bolts. You...
  18. BearzGT

    Which CC plates are you guys using?

    Steeda HD CC plates here for over four years. Did them along with the Steeda Ultra Lights and Tokico D-Specs. Nothing abnormal to report.
  19. BearzGT

    New Super Snakes should I powder coat

    Dura-Bright finish all day.
  20. BearzGT

    Some pictures of my Windveil Blue GT

    Car always looks good. Great part of the country for both sets of wheels.
  21. BearzGT

    Shelby Wheels! Get them While they last!

    Anyone considering these, be very careful with Cruizin Concepts Wholesale. They are my "fuck MMR" site. If you think Marcel got fucked in the ass in Pulp Fiction, that aint nothin compared to what those assholes are capable of. Search this site for my prior posts. Great to see they produced...
  22. BearzGT

    TPS 14" 4 Piston Brembo GT500 Big Brake System-FREE SHIPPING!!

    Thanks Mike. I did receive the slotted /drilled rotors this past Saturday. I installed everything over the weekend. Planning on bleeding the system this evening after work. I have a question regarding the Centric pad keeper pins for the Brembos. I'm assuming they need to get tapped into...
  23. BearzGT

    TPS 14" 4 Piston Brembo GT500 Big Brake System-FREE SHIPPING!!

    I don't have the slotted/dimpled rotors like you guys do. My situation is that I ordered slotted/drilled and received slotted only. My kit hasn't even been on the car yet. Mike sent me an email today indicating the slotted/drilled discs should be on the road to me today. I'm waiting on...
  24. BearzGT

    TPS 14" 4 Piston Brembo GT500 Big Brake System-FREE SHIPPING!!

    Mike: Any word on my drilled/slotted rotors? Didn't see anything from the USPS today.
  25. BearzGT

    TPS 14" 4 Piston Brembo GT500 Big Brake System-FREE SHIPPING!!

    Thanks Mach2. Sorry to hear you're having the same issues as 69Mach1. Are you guys convinced it's the rotors or is there some other issue with this kit that I'm going to be faced with? Have you guys identified where the sound is coming from, front/rear, right/left, etc?

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top