Search results for query: *

  1. pqtiii

    Cobra motor in 07 ????

    I couldn't find much info either...
  2. pqtiii

    Cobra motor in 07 ????

    Does anyone know where I get get some info on swapping 04 Cobra motor into an 07 Mustang? Thanks pt
  3. pqtiii

    Turbo guys, lets talk.

    Noticed that you said that you recommended changing from 3.73 to 3.31. I keep wondering if I should go from 3.31 to 3.73. What do you notice? I did a lot of 1/4 racing, but most track are 1/8 around me now. Thanks pt
  4. pqtiii

    Bad rear end oil. Are bearings bad??

    Took the rear apart today. The spider gears were super worn and rounded. Does this happen a lot and what can I install in its place so that this doesn't happen again? Thanks pt
  5. pqtiii

    Bad rear end oil. Are bearings bad??

    I pushed the car side to side from both sides and it seems solid. I even jacked up the rear and pulled on both tires. I could feel the normal C clip end play, but that was it. What gets "toasted" in the rear to make this happen?
  6. pqtiii

    Bad rear end oil. Are bearings bad??

    Not fishtailing. It fells as if the rearend moves a little to the right than back to left only when I shift going straight. Driving down the road in a gear feels fine.
  7. pqtiii

    Bad rear end oil. Are bearings bad??

    Everything is stock. I changed gears about 8000 miles ago. It started making noises a few months ago so I thought it might need more additive. That is when I discovered the black oil. The swaying made me park it. pt
  8. pqtiii

    Bad rear end oil. Are bearings bad??

    The back of the car started swaying when I shifted gears going down the highway. I check the oil and it was solid black. I assume the clutches are totally gone after about 200 passes at the track. I noticed that one of my wheels would stop spinning during a burn out towards the end. Does the...
  9. pqtiii

    should i replace my rear end s spring with a f150 sping?

    Is there a big advantage to using the carbon clutches over the stock ones??? pt
  10. pqtiii

    WOTBOX + 5 speed users....

    The one thing that I noticed that help me a bunch was the fact that it was harder to miss a gear after the WOT install. All of the butterflies and things to watch while going do the strip tend to impair my shifting abilities at times. Not to mention the sweaty palm on the shifter from having the...
  11. pqtiii

    Rear End Clutch Pack

    I replaced the ring/pinion set about 8000 miles ago. It has about 150 trips down the race track. It started making a whining noise, so I was going to add some modifier. The oil was black. Is this the deterioration of the clutch pack or something else? What is the recommended replacement...
  12. pqtiii

    Gt500 block power level???

    Without getting my head ripped off!!! I found a used 2007 GT500 that my wife gave the green light to buy it. I see a lot of the GT500 cars getting (claiming) 6-700hp. Do you have to change any of the internals (pistons or rods) to accomplish these hp levels? Thanks pt
  13. pqtiii

    Turbo guys, gearing?

    When running 28in tires, is it better to run 3.73 vs 3.31? I need to rebuild my rear and have extra 3.73 and 4.10 gears. Running 28 MT slicks with 3.31 and 5000rpm @finish line. Don't want to waste the boost in 1st though.
  14. pqtiii

    Parts needed for gear swap?

    Just checked the oil in the rear. Oil looked like it had black dusty material floating around. Is that clutch material or metal? Planning on a rebuild soon. Hopefully it will make through this weekend at the races. Do you need to replace the clutch pack when you do a rebuild, if so where can...
  15. pqtiii

    Parts needed for gear swap?

    How can you tell if they are bad? I have about 150 passes on mined and the rear is starting to howl bad.
  16. pqtiii

    02 sensor locations??

    Are the 4 02 sensors interchangable or are the location specific? Can you switch the upstream and downstreams? Thanks pt
  17. pqtiii

    Kooks longtubes Problems Already!

    What problems does a plugged CAT cause? That happened to mine last week and I drove 2 hundred miles until I figured out I had a problem.
  18. pqtiii

    exhaust leak

    Not sure how much pay I have in it now that it's welded. Might have to cut it and reweld it. Trying to figure out where I got it from so that maybe I could order the short flange pipe and try it again. Fuel trim data is wigging out on that side. Hopefully because of the exhaust leak and...
  19. pqtiii

    exhaust leak

    Been trying to figure that out all morning. I think it's Pypes, but not sure. Bought it a while ago.
  20. pqtiii

    exhaust leak

    How could you tell if it mated properly? I can't even see to make sure that the fit is good. To make thing bad, the pipes are all welded...
  21. pqtiii

    exhaust leak

    Can't really remember. Maybe I'll try tightening the leak side first or try it evenly. Sorry it's an off-road pipe. I lost a cat and had the off road pipe in the shed.
  22. pqtiii

    exhaust leak

    I installed and off road pipe and getting a bad leak where it bolts to the manifold. I have cranked on it so much that the Hpipe flange is starting to bend. What's the best/easiest way to get this leak plugged? Thanks pt
  23. pqtiii

    Built Short/Longblock

    You wouldn't have to take the crank out, right? Just get the piston/ rods balanced as a set.
  24. pqtiii

    Built Short/Longblock

    What's the power level with this kit and a stock crank keeping the rpms around 6500??? Thanks pt
  25. pqtiii

    Built Short/Longblock

    Does anyone offer a rod/piston kit with the bearings and rings?

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top