Search results for query: *

I have the following parts for sale because I put some jri struts and a watts link on the car: Koni Sport front Struts SOLD 15,000 miles Eibach Pro kit lowering Springs SOLD 10,000 miles UMI on car double adjustable Panhard bar (rod end/poly combo) SOLD 15,000 miles...

I want to start doing some TT's next year with the SEDIV SCCA as they do a lot of events within a reasonable driving distance. I am looking at bolt in Roll bars and like the MM bar the most, but i'm not sure it would pass tech. top of the hoop must be a Max 6" from the driver's head. in my...

Went to start the car today and the it was dead (haven't driven in a month), put it on my trickle charger and went to work in the truck I came home and heard a low pitch but quiet buzzing sound. tracked it down to the alarm horn in the trunk, car still dead. I disconnected it and am waiting...

just changed mine and its a pita with the vortech. I set a new record of an hour though. I got 25,000 miles out of it until it started squeeking so bad I couldn't stand it anymore. ordered a new gates belt on amazon for $35 installed and no more squeeking. how long are your's lasting?

He won the ESP class at the SCCA National Match Tour Autocross. And a thanks to Sam Strano. He told me that my car was the worst driving S197 mustang he has ever been in, and to change my swaybar setting. car felt much better after doing that. didn't help my performance as i was having a...

bought the prothane kit for the front lower control arms. the rear bushings are cake to remove. what is the secret to the front bushings? i can't figure out how to press it out without undue stresses (don't want to bend it like the other guy on the board) After burning out the rubber and inner...

Shaftmasters, refurbed, direct from them. I just bought one and they listed this one a few hours later. $475 and $12 shipping http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&vxp=mtr&item=160941459670

I left the Sam's parking lot and gave it a bit of gas to get into traffic. i hear what i think is an exhaust leak and then it went away within 100 yards. I notice my coolent temp climbing so i pulled into a parking lot to see if i broke a belt. try to pull the belt off and its loose but won't...

I just installed a pioneer 4400. with my infinity componets, holy hell it sounds awesome, except my door panels sound like they are falling apart. i can press on the armrest area and it stops. i've already glued the door handle bolt cover down, how do i stop the rest from rattling like a tin...

2005 GT. I was half mile racing and had the undertray that goes between the bumper and core support blew out of the car at 140. nearly shit myself. anyways, i can't remember the name of it to order a new one and am having problems finding it on tousley and other parts sites. please help...

car-vortech with water intercooler and lt headers. I bought it this way 3 years ago. i was performing the fuel pump TSB for the 05-06 cars because i was having the car bog badly at autocross and when less than 1/4 tank and noted the fuel pump was built in 05. It ran great otherwise To my...

http://wannagofast.com/index.html march 24th No timing lights, someone starts you, top speeds gotten by cops with radar guns at top end, lots of fun. i did this last october and was running 138 mph with my 440 whp '05. really laid back. i can't make it this time due to a poorly timed...

Just put these on. 18x10 all the way around. American Muscle says they are +48 offset. +45 is stamped on them. i put a 7/32" (around 4.5 mm) spacer up front as the wheel was kind of close to the koni sport strut. 255/45's up front 285/40's rear. will be going 285's all the way around...

way to go on that ESP championship for the SCCA Southeast Division in Moutrie, Ga. It was excellent meeting you and all the other Atlanta Region guys and can't wait to do it again next year!

I have a vortech V2 with aftercooler kit, JBA longtubes and o/r H pipe. The car runs great on the street no problem there on the autocross circuit (concrete pad, extra engine load) in SECOND GEAR ONLY it bogs and sputters a bit until it gets to around 2500-3000 rpms and then runs like a raped...

::UPDATED further down:: Konig Kilograms 18x9.5 +35 offset 21.1 pounds. Hankook RS-3 285/35-18 they are a little short but these are going to be my autocross wheels and tires, it will help with gearing and turn-in. They are going on the car tomorrow as it was dark when the UPS fairy stopped...

I also posted a video in the video section... but posted some pics here so you guys could see! I put on the Strano triple adjustable sway bars saturday with the soft front, medium rear as suggested and WOW! a lot less body roll, MUCH quicker turn in and a lot less understeer (needs...

Some pictures from yesterday's autocross in dothan, al

I ran my first autocross event this weekend and my car has massive oversteer on and off throttle. for right now the car has eibach pro springs, stock shocks, -2.5 degrees camber in the front wheels running nitto 555's 255/45front 285/40rear, and stock sway bars. the back end was stepping out...

I just bought 2 pair of infinity kappa 6x8 component speakers and need ideas for where to mount the tweeters, front and rear. i know i can drill the door panels and flush mount them but would rather not as i would have holes there if i ever wanted to remove the tweeters and the door panels are...

i know they arent out yet but this is something i would be interested in doing with my 05. do you guys think the shifter location/studs will be in the same locations? clutch and slave work? new driveshaft? and most importantly, will they be for sale on newtakeoff?!?!

(long post warning) little background on me and the car. I'm 24, a mechanical engineer, been around cars all my life. Helped my dad build his 5 second 1/8th mile (high 8's, low 9's in quarter depending on weather and gears) Camaro over several different build cycles and restored my 67 Nova SS...