05-2010 Mustang GT P1SC Procharger Stage II, RED RACE VALVE, 800 hp F1A intercooler

[ChiDiddy]

Ok This is going to be a weird sale. I just purchased an f1a procharger kit from a buddy that only put 11 track passes on the kit. Buyer has the option to choose HO piping(10k miles on it) or stage II piping (11 track passes on it, basically brand new).

If you decide to go with the stage II piping(with aluminum coolant tank), you will need to buy a slim fan and shroud , either from procharger, or a nice 3000 cfm slim fan and make your own aluminum shroud. Picture of the stage II piping is the one with them in green bubble wrap. HO piping is the one thats still on the car.

If you go with the HO piping, nothing else is required.

The P1SC headunit has about 10k miles on it, all street use.
I am including a 12 rib belt setup with a 4.25 pulley(11 track passes, basically new) on this P1SC. This is coming from the f1a kit i purchased, which i wont be using. Keep in mind you must use an ATI super damper to run a 12 rib kit.

Kit will come with the standard procharger bypass. What you will need extra is the fuel stuff (injectors, fuel pump, tuner)

This setup would be perfect to run 650 rwhp on, without issues. Procharger intercooler has same miles as the head unit(10kish)

If there is anything im missing, please ask.

SOLD

THE FOLLOWING BELOEW ARE NOT INCLUDED IN THE P1SC KIT SALE

Next is the procharger F1A 800-900 hp huge intercooler. Perfect for anyone looking for extra cooling on their D1SC. Intercooler only has 11 track passes on it, basically brand new. LOOK AT THE SIZE COMPARISON OF THE STANDARD 3 CORE PRCOAHRGER intercooler that comes with D and P series. Procharger wants 900.00+, im asking SOLD.

8 rib 3.7 procharger pulley 10k miles SOLD
8 rib 3.4 procharger pulley BRAND NEW IN BAG 75 shipped (just bought for 110 2 weeks ago)


Last is the open procharger red race valve from the f1a kit i bought. I already have one, so i dont need this. Already welded to be direct replacement for your current bypass valve. I will give the buyer the option of taking my POLISHED race valve(the pic shows it kinda dirty, which i will clean if buyer chooses to take it) or the red one. polished has 4k miles on it. Valve retails 400 without the weld and piping. SOLD (480 value)

ONce again, if anyone has any questions, please dont hestitate to PM me. I would prefer to sell the Stage II kit just for the simple fact that it wouldnt reqiure me to remove my HO piping LOL. Yes i am Lazy.....

All prices include shipping, and paypal fees. Please dont waste my time and I will not waste yours. Local pickup would be GREAT.


PIcs are in next post if i can get this to work right

 

[ChiDiddy]

 

[quiksilver15]

I'm trying to look at pics of the kit, but all I see are bouncing boobies haha.
free bump, its not tax time yet

 

[ChiDiddy]

I'm trying to look at pics of the kit, but all I see are bouncing boobies haha.
free bump, its not tax time yet

I try

 

[ChiDiddy]

ttt offer up, worst i can say is no.

 

[ChiDiddy]

red race is sold

 

[10851stang]

My pully says 3 14 on it. Your pullies are bigger right so less boost? I want a smaller pulley for more boost. Also how thick is the bigger intercooler? Mine is 3 1/2 inches. Is that the bigger one or smaller one? Are you selling the f1a head unit? Thanks

 

[ChiDiddy]

My pully says 3 14 on it. Your pullies are bigger right so less boost? I want a smaller pulley for more boost. Also how thick is the bigger intercooler? Mine is 3 1/2 inches. Is that the bigger one or smaller one? Are you selling the f1a head unit? Thanks

you have a 3.14 pulley and only make 8psi? Doesnt sound right. 3.7 pulley typically gets 10-12 psi. 4.4 will get 14-15 psi. WHat type of procharger do you have? stock motor couldnt handle your pulley if it is 3.14. And no im not selling the f1a.

The 800hp intercooler is 4.5 inches thick. So you have the smaller one.

 

[ChiDiddy]

procharger kit is sold!

Only items left are the intercooler and 3.4 pulley.

 

[05stroker]

PM seent on the IC.

 

[ChiDiddy]

PM seent on the IC.

replied

 

[ChiDiddy]

intercooler sold!

3.4 pulley left. Surely someone wants to up their boost!

 

[05stroker]

intercooler sold!

3.4 pulley left. Surely someone wants to up their boost!

If only it was a 12 rib with grooves and I wanted 40psi on my F1a! LOL

 

[10851stang]

haha I looked again and apparently I'm dyslectic because it says 4.13 lol I have the P-1SC-1. It is the 10psi HO kit but on my dyno graph and on my boost gauge it says in only getting 8 psi. Procharger said something like my exhaust is so efficient that the boost will read low but im still getting 10 psi. It didnt makes sense to me but im happy with my numbers. I see you sold the intercooler

you have a 3.14 pulley and only make 8psi? Doesnt sound right. 3.7 pulley typically gets 10-12 psi. 4.4 will get 14-15 psi. WHat type of procharger do you have? stock motor couldnt handle your pulley if it is 3.14. And no im not selling the f1a.

The 800hp intercooler is 4.5 inches thick. So you have the smaller one.

 

[05stroker]

haha I looked again and apparently I'm dyslectic because it says 4.13 lol I have the P-1SC-1. It is the 10psi HO kit but on my dyno graph and on my boost gauge it says in only getting 8 psi. Procharger said something like my exhaust is so efficient that the boost will read low but im still getting 10 psi. It didnt makes sense to me but im happy with my numbers. I see you sold the intercooler

Yea my 3.9 made 12 psi on a p1 blower. Now a 3.9 makes 27 psi on my F1a A 4.1 is 24 psi. on my F1a.

Oh and yes, I cant wait for the I.C. to arrive. If you know anyone who needs a std Procharger I.C then they are in luck as I will have one available in a few days.