06 rear drag tire and rim size for drag pack

06GT-

Junior Member
Joined
Feb 16, 2026
Posts
25
Reaction score
2
Location
Dallas
2006
Bmr sway bar
Is 15x10 the widest rim?
What offset and tire size are the goto?
Also what’s Widest and tallest option?
 

07 Boss

Senior Member
Joined
Jan 25, 2009
Posts
4,297
Reaction score
1,406
Location
Sin City
I went with race stars 15x10. I believe the offset is 45 or 46 mm. I believe I use a 28" x 11.5" Hoosier QTP. I can look when I get home. You can probably go with a 29" tall tire but but the narrowest tire was 12.5" wide and thought it might be too wide. I believe you will need a relocation bracket for the sway bar.
 

Midlife Crises

Senior Member
Joined
Jul 20, 2019
Posts
2,345
Reaction score
1,866
Location
Fairbanks, Alaska
I’ve run the 15-10 Race Stars with 28X10.5 Mickey Thompson ET Drags on my 2010 GT. The wheels do have about a 45mm offset and a 7” backspace and fit in the wheel well perfectly. Sway bar relocation brackets are required.:driver:
 

06GT-

Junior Member
Joined
Feb 16, 2026
Posts
25
Reaction score
2
Location
Dallas
I went with race stars 15x10. I believe the offset is 45 or 46 mm. I believe I use a 28" x 11.5" Hoosier QTP. I can look when I get home. You can probably go with a 29" tall tire but but the narrowest tire was 12.5" wide and thought it might be too wide. I believe you will need a relocation bracket for the sway bar.
My bmr sway bar should clear, when you have a moment to check what was the size?
 

MrBhp

Senior Member
Joined
Sep 12, 2013
Posts
1,800
Reaction score
1,508
When I changed up my setup, I had (aftermarket) swaybar interference. Instead of relocating it, I just cut the ends off, just past the grommet.
 

MrBhp

Senior Member
Joined
Sep 12, 2013
Posts
1,800
Reaction score
1,508
What was your setup?
My street setup. 20x11 with 305/35/20's i think the tires are close to 29" tall.
Are you running an adjustable panhard bar? It will help you get the most from the real estate you have.
 

07 Boss

Senior Member
Joined
Jan 25, 2009
Posts
4,297
Reaction score
1,406
Location
Sin City
My bmr sway bar should clear, when you have a moment to check what was the size?

If your BMR bar looks like this and uses the stock mounting locations you will probably need the relocation bracket. I had this bar and went with relocation brackets. Granted I didn't ever try and fit them without the brackets so I'm not 100% sure it won't work.


I later switched the the Extreme Anti-roll Bar and it mounts in a completely different location so if you have this one you're good.
 

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top