Another 15 inch wheel option>?

[black05stxjt]

well the other option is the jegs wheels....ive personally test fit them and they clear the front with a 3/8 spacer....i keep looking at holeshots and bogarts and could not justify the money on the wheels that are supposed to "fit" and on 1 wheel has spacers weld to them and the other comes with spacers to i ordered a jegs front runner. what the hell 89 bucks and ill be dang if it didnt fit with what is imo a small spacer compared to the welds. should have pics tomorrow with tires and spacers.and with end the next week or 2 i will be test fitting there 15x8 with 5.5 back spacing on the rear as well. jared

 

[Born To Run]

Weld Rims

^^^exactly what he said^^^

You answered the inquery by saying that you in fact did call them back (right before you said you didn't assure anyone that you would call them back)

The date in question was Oct 1,i called Oct 6.Are you people lawyers or what.Geez stop busting my balls,thats why i divorced my first wife
You can be sure of one thing,when you take a shower with your clothes on it shows your crazy,& when you shower with your clothes off it shows your NUTS!!!
I will keep quiet now,the 5th to you yanks.
Later,
Randy.

 

[black05stxjt]

 

[Kipp07GT]

Got any better up close pics of the jegs wheels? I tried with the weld prostars and couldnt get the shit to work, so I sold them. But after seeing yours im wondering what I did wrong. Do you have longer studs and what kind of lugs did you use?

 

[black05stxjt]

i used stock lug nuts and studs..this is the closet pic i have..i believe these are built slightly different from the standard weld pro star.

 

[don_w]

Let us know how the test fit on the rears work. That could be a viable alternative for a lot of people.

 

[scramblr]

well the other option is the jegs wheels....ive personally test fit them and they clear the front with a 3/8 spacer....i keep looking at holeshots and bogarts and could not justify the money on the wheels that are supposed to "fit" and on 1 wheel has spacers weld to them and the other comes with spacers to i ordered a jegs front runner. what the hell 89 bucks and ill be dang if it didnt fit with what is imo a small spacer compared to the welds. should have pics tomorrow with tires and spacers.and with end the next week or 2 i will be test fitting there 15x8 with 5.5 back spacing on the rear as well. jared

Definitely liking the prices on their site. Can you post some part numbers?

 

[Kipp07GT]

Used stock lug nuts and they fit right over with just a small spacer, shit I may need to check these out. One last ? though, stock studs or bigger ones?

 

[Freaknazty]

ok just got off the phone with billet specialtys he said their wheels have a 13" drop center .....does any1 know off hand how many inches it is from the center of our axles to the outside the caliper ? he said if its under the 13" total ( center axle to caliper X's 2 )they should fit no prob .... now these arent as cheap as the jegs or welds but just another option for 300 less than rear bogarts

http://www.billetspecialties.com/item.asp?cid=16&scid=251&pid=940

 

[US-1]

ok just got off the phone with billet specialtys he said their wheels have a 13" drop center .....does any1 know off hand how many inches it is from the center of our axles to the outside the caliper ? he said if its under the 13" total ( center axle to caliper X's 2 )they should fit no prob .... now these arent as cheap as the jegs or welds but just another option for 300 less than rear bogarts

http://www.billetspecialties.com/item.asp?cid=16&scid=251&pid=940

Tell ya' what.....if we don't find out before the SEMA show I'll go straight to their booth, take two wheels, find a Mustang (shouldn't be too friggin' hard at SEMA), and find out firsthand if they fit or not.

Hell...they're in Illinois. Is there anyone on this board close enought to them to drive over and find out???? Or anyone near a Jeg's or Summit store?

 

[Kipp07GT]

Part # on the front runners from jegs? Are they the 3.5 or 4's.

 

[MLC40]

Tell ya' what.....if we don't find out before the SEMA show I'll go straight to their booth, take two wheels, find a Mustang (shouldn't be too friggin' hard at SEMA), and find out firsthand if they fit or not.

Hell...they're in Illinois. Is there anyone on this board close enought to them to drive over and find out???? Or anyone near a Jeg's or Summit store?

They are close to me, I will drive over next week. I let you know what I find out.

 

[Freaknazty]

well damn sd looks like that was a good idea lol

 

[US-1]

well damn sd looks like that was a good idea lol

Yeah...I'm an idea man. Got all these ideas, lots of ideas, ideas running rampant all through my head, tons of ideas I tell ya'.


Problem is....most of them suck.

 

[Freaknazty]

either that or would cause massive riots in the streets lol but thats ok we'll take it easy on your dumb 1's because your good 1's make up for them lmao


ps when you gonna let me take that car for a spin ?

 

[US-1]

Just as soon as that $60,000 check you write me clears the bank.

 

[psycho bob]

so what happened to website. the one that i have that used to work no longer works. http://www.gregweld.com/

 

[US-1]

so what happened to website. the one that i have that used to work no longer works. http://www.gregweld.com/

Engineered in China. See how that shit breaks?

 

[Freaknazty]

yep i had looked for it the other day to get their number ..... no website to be found just some other bs pages linked to the phrase " greg weld " so hey born to run whats the update ?

i see it now dex will have these rims mass produced before greg weld does lmao

 

[black05stxjt]

they are 15x4 with 1.75 back spacing the part number is 555-67051...i plan to run 15x8 with 5.5 back spacing on the rear....just not sure how much of a spacer i will have to use....i already have longer studs for the rear just need to install them. jared