Anyone help with fitment?

[RDK]

looking to run the enkei PF01 rear on my 2011 5.0


460-895-6535SP PF01,18x9.5,35,5x114.3,75,SP

460-8105-6538SP PF01,18x10.5,38,5x114.3,75,SP


Which one would sit in more?

Going to be running a 285/40/18 NT05R drag radial or Mickey Thompson Drag radial..

 

[RDK]

or do 18x9.5 with 45mm for rear?

anyone have PF01 on here?

 

[Jaylee]

I have them on my 07. I have the 18 x 9.5 with a 35mm back spacining. They sit almost flush with the fenders.

 

[Jaylee]

I forgot to mention that I had mine powder coated satin black. At the time I got mine they only offered them in silver. I heard that Enkei has released them in a limited edition black. I am not sure if it is true or not.

 

[RDK]

some say 45 offset 18x9.5?

hmmmmmmmmmmm

 

[Infamous]

18x9.5 et 45 would be pretty far in the fenders. jaylee's et35 9.5's look great and that would be the offset i'd get if i went for a 18x9.5

if you were into a poke/JDM look you can get the 10.5's and run 285's with a mild stretch and have the whole setup a bit outside the fenders

 

[RDK]

anyone else tried to use the PF01?

Ryan

 

[Jucostud]

Get the 45mm offset. That will give the best fitment. It will also tuck the tire in better if you ever decide to do a 305. The offset on my wheels are 59mm. Btw, factory gt500's are 18x9.5 with a 45mm offset and they use 285/40/18's.

 

[peetiewonder]

18x9.5 et 45 would be pretty far in the fenders. jaylee's et35 9.5's look great and that would be the offset i'd get if i went for a 18x9.5

if you were into a poke/JDM look you can get the 10.5's and run 285's with a mild stretch and have the whole setup a bit outside the fenders

this would also make your tread sit inside the fender line.