Bent axle

[08candyappleGT]

Ok so about a week ago i bent and axle so i figured now is a good time to get the Moser. So where is the best place i can get them from? I would also like the get new abs rings and wheel studs with them.

 

[jerrytubbs1]

In all honesty you are better to get you the ford 31 spline.ON the gt500's there are several that have bent or broke the Moser axles.And few and far between that have screwed up the stock axles.

I can cut 1.4 60's in my gt500 (4040) lbs race weight and still on my stock axles.

 

[08candyappleGT]

ok well thats good to know. Where can i get the ford ones at a good price. The dealer ship wants $400 for just one axle and another $500 to do the install.

 

[jerrytubbs1]

You can get the whole rearend on ebay and new take off dot com for about 550.00

 

[navbtcret]

Ok so about a week ago i bent and axle so i figured now is a good time to get the Moser. So where is the best place i can get them from? I would also like the get new abs rings and wheel studs with them.

Powerhouse, who is a vendor here, has a pile of Moser axles. Mike can also get you the new abs rings and wheel studs. He has the axles cheaper than you'll find them anywhere new.

As far as people nbending or breaking the Moser's, I have not heard of a lot of them. There are 9, 10 and 11 second Mustangs on this site running the Moser's without issues and cutting 1.4 amd 1.5 60' times. I am running them too and cut 1.5 60' times.

You will not go wrong buying a set of Moser's.

 

[05stroker]

Powerhouse, who is a vendor here, has a pile of Moser axles. Mike can also get you the new abs rings and wheel studs. He has the axles cheaper than you'll find them anywhere new.

As far as people nbending or breaking the Moser's, I have not heard of a lot of them. There are 9, 10 and 11 second Mustangs on this site running the Moser's without issues and cutting 1.4 amd 1.5 60' times. I am running them too and cut 1.5 60' times.

You will not go wrong buying a set of Moser's.

Yea I have a 1.58 on 20s with my Moser's and what I think is about a 4000lb car. That was at 600 rwhp.

 

[jerrytubbs1]

I still stand behind what I said.
The stockers are just as good/better.They go thru about the same process hardening and all.
Go over to team shelby and svt and see how many guys put their stock axles back in AFTER they broke their moser axles and moser told them"tough, its your fault,but we can send you another set at your cost"

I'm not saying you and the other guys here running them are not having good results.But I know that I broke moser,and more than a handful have also.But I've only heard of one failure on the stock axles with a 1.50 or less 60',now thats alot less than I've heard of the mosers bending/breaking.

There have been many gt500's and gt's in the 11's 10's and 9's on the stock axles.
I could have offered to sell the op a set of Moser myself,but I still think he will do better on stock axles.
This is my opinion that I'm entitled to and from first hand problems with the mosers.

 

[GI Joe]

I can hook you up with a fair price on set we just pulled out of a car with 3000 miles...email me
[email protected]
for more info or pics

 

[james432]

i love my moser axles no problem here

 

[*JZ*]

Moser or Strange.

We are distributors of both.


I'm personally running Strange in my street/drag car. I love them.

 

[StangPower05]

Ok so about a week ago i bent and axle so i figured now is a good time to get the Moser. So where is the best place i can get them from? I would also like the get new abs rings and wheel studs with them.

may i ask how you bent your axle?

 

[EagleStroker]

may i ask how you bent your axle?

Very carefully?

 

[StangPower05]

Very carefully?

lol i was just wondering. cant be curious?

 

[jp's performance]

You can get the whole rearend on ebay and new take off dot com for about 550.00

+ 275-400 to ship it.

 

[jp's performance]

ok well thats good to know. Where can i get the ford ones at a good price. The dealer ship wants $400 for just one axle and another $500 to do the install.

i will sell you both my stock axels with abs rings for $250.00 shipped great shape