Borg Warner Air Werks 177275

[gray1622]

I need new turbo. I am on budget. I was just going grab a on3 70mm. I see that amazon has Borg Warner Air Werks 177275 for 560. Is there any way to get the 4.21 outlet on turbine to match the outlet on my on3 Kit? 177275 is a 2014 model. Any other suggestion?

 

[gray1622]

OK, so I found this http://www.treadstoneperformance.com/product.phtml?p=2542&prodname=Borg+Warner+EFR+
+Housing+V+Band+Flange+3.5"+Downpipe and this http://www.himni-racing.com/turbo-flanges-adapters/turbo-exhaust-adapters. Thinking going with the himni one. I think I just grab a silicone 3 to 2.5 coupler. What you guys think. I read that frames are large. I am little worried about that. I feel much better with a borg vs on3.

 

[rcm90]

That should fit with no problems. On my 3v car I had a Bullseye s376 with a unmodified on3 crossover. http://www.theboostlab.com/store/products/Bullseye-Power-S376--Billet.html

I made a 4" dp, installed a slim line fan and moved the radiator forward by re drilling the upper mounts due to the big race cover, but it fit fine and actually had a 1/4" to 1/2" to spare. Ill try to upload some pics in a bit.

 

[gray1622]

Thanks man