Bullitt #2479 Build

[tigerhonaker]

It looks pretty good. I threw the sleeper look out the window though.....

I'm looking into doing a full 3" inch exhaust as soon as the corsas sell, so that should wake the car up more for when I dial the boost up, and I'm also going to be adding a set of 315s to the rears.

Have you Seen and Read this Thread on my 3" Exhaust ????????

It does get one's attention for sure.

If you are interested I have a "Contact" for you that will save you some
"Major-Bucks" on it.

Let me know and I will Post up that Contact.

Magnaflow #16674 Exhaust Stainless Steel W/3" Pipes
& 4" EXH. Tips, SATURDAY-INSTALL

http://www.imboc.com/forums/showthread.php?t=168811&highlight=tigerhonaker+installs+the+%2316674+Magnaflow+exhaust


Terry

 

[GrnBullitt08]

Have you Seen and Read this Thread on my 3" Exhaust ????????

It does get one's attention for sure.

If you are interested I have a "Contact" for you that will save you some
"Major-Bucks" on it.

Let me know and I will Post up that Contact.

Magnaflow #16674 Exhaust Stainless Steel W/3" Pipes
& 4" EXH. Tips, SATURDAY-INSTALL

http://www.imboc.com/forums/showthread.php?t=168811&highlight=tigerhonaker+installs+the+%2316674+Magnaflow+exhaust


Terry

Yeah I would be interested in knowing that contact if you wanna PM it too....the price to beat is $439 by Jegs. Thats what the 3" Dynomax system runs.

 

[tigerhonaker]

Yeah I would be interested in knowing that contact if you wanna PM it too....the price to beat is $439 by Jegs. Thats what the 3" Dynomax system runs.

Sorry, These are Higher than that Big Guy .........

I'm thinking like $650.00 range and List is $900.00 .....

Looks like there is going to be a 3" Dynomax coming to a Bullitt in IN.

Terry

 

[white05gt]

Tiger, do you have 1 5/8" or 1 3/4" kooks headers? Oh and I want daytime pics of the bumper mod for the intercooler

 

[tigerhonaker]

Tiger, do you have 1 5/8" or 1 3/4" kooks headers?

They are 1 5/8" to match the Exhaust Ports on the Heads which are 1 5/8".

Terry

 

[white05gt]

They are 1 5/8" to match the Exhaust Ports on the Heads which are 1 5/8".

Terry

Just curious, that's what I have and have been thinking about that 3" exhaust. Just not sure if it will be too loud for my taste.

 

[tigerhonaker]

Just curious, that's what I have and have been thinking about that 3" exhaust. Just not sure if it will be too loud for my taste.

Well I can add some additional comments on that "Exact" Topic.

Check this Thread out as to what I did a few months back.

http://www.imboc.com/forums/showthre...49#post2029849

Now this is where it gets really interesting.

I just Traded a Bullitt Owner in TX. for his 3" Magnapack Mufflers to install
on my Bullitt.

So, this will probably answer your question if they are to LOUD.

They do have an AGGRESIVE Deep, Throaty Sound.

But I can tell you IMHO they just make a High Horsepower Mustang
Sound AWESOME !!!!

I just cannot take a to quiet Performance Mustang.

So, back on go the Magnapack 3" Stainless Mufflers with my existing
Magnaflow Stainless 3" Tailpipes.

They were sent UPS to me today from TX.

Hope this Helps you some with what they Sound like and why I have
decided to reinstall them on my Bullitt.

They should be here I think on Monday and will be installed the next day.

Say, here is an idea for you on what they Sound like on a 574 H/P Mustang.
Click on my Video below in my Sig.
That will give you the idea I think if you have a really good 5.1 Surround
System hooked up to your computer.
Crank the Volume up and see what you think as it will have a Demo on the
Dyno, a Burn-Out, and a Few Wide-Open Runs through the Gears from
inside the Mustang.

Terry

 

[GrnBullitt08]

Sorry, These are Higher than that Big Guy .........

I'm thinking like $650.00 range and List is $900.00 .....

Looks like there is going to be a 3" Dynomax coming to a Bullitt in IN.

Terry

Yeah, I actually ran the 3" magnapacks. It was my first system.

 

[GrnBullitt08]

Tiger, do you have 1 5/8" or 1 3/4" kooks headers? Oh and I want daytime pics of the bumper mod for the intercooler

Will have them up as soon as I get a nice day.

 

[tigerhonaker]

Yeah, I actually ran the 3" magnapacks. It was my first system.

Well, then you already have 1st hand knowledge of them.

I like them........

Terry

 

[GrnBullitt08]

Just curious, that's what I have and have been thinking about that 3" exhaust. Just not sure if it will be too loud for my taste.

3" inch system make noise.....usually alot deeper from my expierence.

 

[GrnBullitt08]

Well, then you already have 1st hand knowledge of them.

I like them........

Terry

yeah they are a good sounding system...a little drone

 

[tigerhonaker]

yeah they are a good sounding system...a little drone

That is correct and especially if you Lug the car in a higher gear at slow speeds.

With my 4:10 Gears I have found that simply running it in the lower gears makes things A-OK for the most part.

I followed my Bullitt from Brenspeed to Indianapolis, IN. which is like 2-hrs.
and listened to it at all different speeds.

It sounds Great from the Outside even when it went by me on the interstate at WOT !!!!!!

I will probably stick with them this go around .......

Terry

 

[white05gt]

3" inch system make noise.....usually alot deeper from my expierence.

I think that might be okay then, I might just have to get them for next winter.

 

[tigerhonaker]

I think that might be okay then, I might just have to get them for next winter.

http://www.southernmustangparts.com/
A PM has been sent to you !!!!!!!

It will have your Contact info.


Terry

 

[Natural1]

Thanks Terry!

 

[NastyStang113]

List might be $900 on that exhaust system but if you pay that you're crazy. A quick Google search and you'll find places that sell it for $600.

 

[GrnBullitt08]

yeah LM performace sells the 3" Magnapack system in the $600s

 

[tigerhonaker]

Yes,

$600.00 and something is correct for the System.

Terry

 

[tigerhonaker]

Well my Magnapack Mufflers are on the way by UPS.

I will be back in business 1st of next week.

Terry