Coyote aluminator

[monk36]

Ya instead you will tell him to take his car to one of the favored forum sposors or some one that is liked here. That will over charge them. Or have issues of other kinds.

There is a reason that MMR is putting out faster cars then every one else.

I haven't heard nothing bad about them. Know least 10 people with there engines/products.

http://www.s197forum.com/forum/showthread.php?t=19906&highlight=MMR+problems

http://www.s197forum.com/forum/showthread.php?t=16179&highlight=MMR+problems

http://www.s197forum.com/forum/showthread.php?t=7598&highlight=MMR+problems

http://www.s197forum.com/forum/showthread.php?t=17300&highlight=MMR+problems

I could dredge up stuff for hours, but I am le tired.

 

[Wnt2gofst]

ALl those are over 2yrs old...

I can find post about every shop or sponsor on here or other sites. That people have had issues with them.

Either way it is what it is. They seem to have some issues a few yrs ago. Not sure they still have these issues or not.

 

[bw281]

Ya instead you will tell him to take his car to one of the favored forum sposors or some one that is liked here. That will over charge them. Or have issues of other kinds.

There is a reason that MMR is putting out faster cars then every one else.

I haven't heard nothing bad about them. Know least 10 people with there engines/products.

I never told him to go to one of our sponsors. Or did your little brain just assume that

I want the guy to actually get new parts that he paid for, or an engine that will actually stay together. Do you work for MMR or does your family work there? Otherwise, I can't see any reason to buy any shit from that place.

"I haven't heard nothing bad."
You obviously have no idea what you are talking about. Hahaha

 

[Godzirra]

Also. Does anyone have the full list of specs and parts in the 5.0 aluminator besides forged pistons, h beam rods and some arp hardware?? I couldn't even find the aluminator on ford racing website, just regular 5.0 and boss crate motors. Does it even come with a forged crank?

 

[KonaGT]

Yes they are built with a forged crank.

 

[Godzirra]

I wonder how much power these will hold and how much boost from a procharger it'll take to get there. To my knowledge I haven't seen anyone with a 5.0 aluminator yet.

 

[Wnt2gofst]

I never told him to go to one of our sponsors. Or did your little brain just assume that

I want the guy to actually get new parts that he paid for, or an engine that will actually stay together. Do you work for MMR or does your family work there? Otherwise, I can't see any reason to buy any shit from that place.

"I haven't heard nothing bad."
You obviously have no idea what you are talking about. Hahaha

Nope dont know any one that works there. Just stating what I have seen in person. Not what some one post on a forum. All the guys I know have recently bought(last yr) blocks/heads/other parts from them with no issues.

 

[KungFuHamster]

Also. Does anyone have the full list of specs and parts in the 5.0 aluminator besides forged pistons, h beam rods and some arp hardware?? I couldn't even find the aluminator on ford racing website, just regular 5.0 and boss crate motors. Does it even come with a forged crank?

the stock 5.0 crank is forged

 

[BMWM3]

I did read and did show two of my club members about the problems with MMR against my proof of problems from the www.s197forum.com members threads. They still went and bought MMR short block (feb 2011) other friend (april 2011) both were installed at same time. And I'm shocked both are still running strong and very fast one has whipple and other has p90x or real term is roush M90. Maybe MMR over the last few months changed their work quality or this could all be a dream and I'm still trapped in a dream from the movie Inception.

 

[94tbird]

Ya instead you will tell him to take his car to one of the favored forum sposors or some one that is liked here. That will over charge them. Or have issues of other kinds.

There is a reason that MMR is putting out faster cars then every one else.

I haven't heard nothing bad about them. Know least 10 people with there engines/products.

Our vendors are some of the best priced you can find. Not to mention you get what you pay for. MMR doesnt put out faster cars than everyone else when you consider, they run the motor, tear it down, run it, tear it down over and over. There is no reliability , no longevity there. Their "Race" motors you are referring to in their "fast" cars are not of the same build quality as their motors you or I will purchase.

Wow 10 whole people? jeez thats quality control there!

ALl those are over 2yrs old...

I can find post about every shop or sponsor on here or other sites. That people have had issues with them.

Either way it is what it is. They seem to have some issues a few yrs ago. Not sure they still have these issues or not.

They are all over 2 years old because the SMART people of our forum have learned to stay the FUCK AWAY from MMR.

Fact is every shop has someone who doesnt like them. Its inevitable. However no one has more bad and less good about them than MMR. google will be your friend there.

That being said if you want to go with MMR, good luck is all we can say. If you post with MMR nutswinging here, be ready to take heat.

Nope dont know any one that works there. Just stating what I have seen in person. Not what some one post on a forum. All the guys I know have recently bought(last yr) blocks/heads/other parts from them with no issues.

Allow me to state what I have seen in person. 5 MMR customers. 5 BLOWN engines, all different tuners, all within 6 months of ownership, 4 of the 5 on break in tunes of less than 10psi.


Allow me to retort to all of your comments at once


FUCK MMR

 

[Greg Hazlett]

Any questions?

 

[Wnt2gofst]

Our vendors are some of the best priced you can find. Not to mention you get what you pay for. MMR doesnt put out faster cars than everyone else when you consider, they run the motor, tear it down, run it, tear it down over and over. There is no reliability , no longevity there. Their "Race" motors you are referring to in their "fast" cars are not of the same build quality as their motors you or I will purchase.

Wow 10 whole people? jeez thats quality control there!



They are all over 2 years old because the SMART people of our forum have learned to stay the FUCK AWAY from MMR.

Fact is every shop has someone who doesnt like them. Its inevitable. However no one has more bad and less good about them than MMR. google will be your friend there.

That being said if you want to go with MMR, good luck is all we can say. If you post with MMR nutswinging here, be ready to take heat.



Allow me to state what I have seen in person. 5 MMR customers. 5 BLOWN engines, all different tuners, all within 6 months of ownership, 4 of the 5 on break in tunes of less than 10psi.


Allow me to retort to all of your comments at once


FUCK MMR

Some of the vendors are the best. The rest just post sales adds every where and shit. Over charge for shipping, and change prices and what not. I know I had it happen. Then tune got from them after a few mods they sent me did not have the red line it was suppose to. After they told me ok to easy. Also it had idling issues.

 

[94tbird]

Some of the vendors are the best. The rest just post sales adds every where and shit. Over charge for shipping, and change prices and what not. I know I had it happen. Then tune got from them after a few mods they sent me did not have the red line it was suppose to. After they told me ok to easy. Also it had idling issues.

what does ANY of what you just typed have to do with this thread?

 

[Greg Hazlett]

Some of the vendors are the best. The rest just post sales adds every where and shit. Over charge for shipping, and change prices and what not. I know I had it happen. Then tune got from them after a few mods they sent me did not have the red line it was suppose to. After they told me ok to easy. Also it had idling issues.

Someone want to decipher this one and post the cliff notes?

 

[BAKnBLK2010]

Someone want to decipher this one and post the cliff notes?

LOL @ Greg

 

[BruceH]

Also. Does anyone have the full list of specs and parts in the 5.0 aluminator besides forged pistons, h beam rods and some arp hardware?? I couldn't even find the aluminator on ford racing website, just regular 5.0 and boss crate motors. Does it even come with a forged crank?

http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=13113

 

[Godzirra]

http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=13113

I'm guessing it still has all regular 5.0 heads, cams, valves, valvespring and retainers and such? I still couldn't find the 9.5:1 compression one listed on the site, just the 11:1 one you posted. Anyone got a good idea how much power the 9.5:1 can hold?

 

[BruceH]

I'm guessing it still has all regular 5.0 heads, cams, valves, valvespring and retainers and such? I still couldn't find the 9.5:1 compression one listed on the site, just the 11:1 one you posted. Anyone got a good idea how much power the 9.5:1 can hold?

The 11:1 is advertised as having boss valvesprings. The 9.5 isn't.

9.5 link:

http://fordracingparts.com/parts/part_details.asp?PartKeyField=12763

 

[Blank]

The only thing I have heard bout mmr is if you have a good block you got a good one if you get a bad one then you got a bad one. The bad are more common then the good also

 

[Shaffe]

This thread looks like it could be a very entertaining read by tomorrow morning hahaha.