E-force guys, let's se those numbers!

[Sinner]

hey guys,
i just wanted to get a thread going so we can post our pulley sizes, psi and power level. we have tons of threads and post about what the whipple or saleen can do but let's have a easy place for info on our blower.

i figure this will help us figure out what power and pulley changes we can make to get an idea of hp upgrades. but of coarse other bolt ons will make a difference but i think this will be a good thread. keep info simple...

my set up..
3.5 pulley
edelbrock comp air kit
stock balancer
not sure of psi (no gauge yet)
517/470 non-corrected

 

[Sinner]

TTT

 

[KDT]

Here is a copy of my dyno sheet when I ran the 3.8" pulley (Brenspeed Stage 0). I haven't had it on the dyno with the 3.5" yet. I'm kinda scared to...lol

 

[doogie]

Here's my mods and dyno results in my sig:

3.5 in pulley
Stock air box
stock exhaust/cams
GT500 pumps

 

[Sinner]

Here is a copy of my dyno sheet when I ran the 3.8" pulley (Brenspeed Stage 0). I haven't had it on the dyno with the 3.5" yet. I'm kinda scared to...lol

lol, i completely understand that... i was hiding in the shop when mine was being tuned.

Here's my mods and dyno results in my sig:

3.5 in pulley
Stock air box
stock exhaust/cams
GT500 pumps

thanks for posting guys and i added my dyno sheet in forst post.

 

[GlassVapor]

Back in 09 with the 3.8" pulley I was at 426hp & 410tq. Don't know what it is now, waiting for Bob Kurgan to get back in town

 

[Sinner]

Back in 09 with the 3.8" pulley I was at 426hp & 410tq. Don't know what it is now, waiting for Bob Kurgan to get back in town

what pulley are you going with now?

 

[brett cravens]

just put e-force with 3.5 pulley 60lbs. injectors gt500 fuel pump pypes long tubes o/r h pipe and 4.10 gears and shaft masters d/s.stock shelby gt mufflers . i had it dyno tuned by dan at pro-dyno .. dont have a pic of dyno sheet ..444 rwhp / 463 rwt ..

 

[GlassVapor]

what pulley are you going with now?

3.5"

 

[Sinner]

just put e-force with 3.5 pulley 60lbs. injectors gt500 fuel pump pypes long tubes o/r h pipe and 4.10 gears and shaft masters d/s.stock shelby gt mufflers . i had it dyno tuned by dan at pro-dyno .. dont have a pic of dyno sheet ..444 rwhp / 463 rwt ..

that's the LT's and h-pype i have too and i love the sound. i have the hot rods and 3.55 gears though. i love the way 3.55s are and i can't imagine 4.10s.... 1st and 2nd must be pointless, lol.

 

[doogie]

3.5"

Trying to keep up, eh George! Well, Bob should have good starting tune on file to use from my car. You sticking with the stock fuel pump and airbox?

 

[GlassVapor]

Trying to keep up, eh George! Well, Bob should have good starting tune on file to use from my car. You sticking with the stock fuel pump and airbox?

Trying to keep up hehe, we shall see at Byron lol.

 

[2010Elanore]

that's the LT's and h-pype i have too and i love the sound. i have the hot rods and 3.55 gears though. i love the way 3.55s are and i can't imagine 4.10s.... 1st and 2nd must be pointless, lol.

Nah I run 4.10's, I wouldn't have it any other way. I think they are the best gear for a SC....then again that is just my opinion.

 

[Sinner]

i really bet it's a f-ing monster!

 

[brett cravens]

i like it but i done the gears,headers and d/s last summer and put the e-force on this passed winter . i like it i still have the stock 3.55 gears, but i think i'm goin to stick with what i have now..it's alot of fun if u like to smoke the tires ALOT.

 

[brett cravens]

are most of u guys running stock clutch with this type of power ..

 

[2010Elanore]

negative...mcleod RST FTW....not a better clutch for street cars period.

But, you can run the stocker for a while...but eventually it will slip...I just changed mine and saved the hassle.

 

[2010Elanore]

i really bet it's a f-ing monster!

It's a beast....480/456 on a very very conservative tune.

 

[brett cravens]

thats the clutch Dan suggested for my car.. didn't know if the stocker would last long or if i should go on and change it.. thanks

 

[Sinner]

i'm still running the stock but it's only been a week, lol. i'm thinking of going with the exedy mach 600.... not really sure. i know i don't want spec though.

what did the mclovin run ya?