First suspension mod? 06 GT

[996Peyton]

Hi all! Have had my car since April now, have done lightweight flywheel and clutch from exedy and thrown a set of rays on it so far, other than that the car is bone stock! but finally ready to pull the trigger on some suspension stuff, currently looking at the white line kit that includes the sways/end links/springs etc and then also doing the rear LCAs and panhard bar from white line too! Wondering if anyone has any suggestions or recommendations on what else to do or choices over these parts. Looking forward to meeting everyone and hearing your opinions, thanks!

 

[Bedouin]

Nice mods & wheels so far..I can only comment on the FRPP springs, shocks, sways Shelby put in my ‘08..I think they’re Eibach & Tokicko but it’s an excellent package..firm & planted, lowered perfectly, & I think some vendors have deals on them.

Good info in this thread;

https://www.s197forum.com/threads/ford-racing-strut-set-up-for-2008-bullitt.155528/#post-2595901

 

[GriffX]

Silver/Black - nice ..... Welcome and swaybars first. With bigger swaybars you can drive softer shocks and springs.

 

[AHaze]

Rear LCAs are a must, decent shocks/struts make a big difference and everything else you listed is nice to have as well. My stance is that the rear sway bar makes a bigger difference than the front. For a primarily street driven car, I like the combination of a 24mm rear bar from a GT500 or later track-pack GT with the stock front bar. Spend the money you save there on the dampers.

 

[JC SSP]

Welcome from Miami, FL.

Good looking GT.

Whiteline makes great products.

 

[Samos3]

Have a look at your front control arms. They are probably the originals. Ford Racing has the newer, heavier replacement with better bushings. Unlikely you will notice a difference, but the bushings are smoother and the balljoint area of the arm won't tear off due to corrosion or age/abuse.
The rest depends on your intended style of driving.